Yalgoo - Extensional Geochem Survey Completed At Remorse
Released
Released
Announcement PDF
ASX : TEM
2024-05-29 | Yalgoo Update: Extensional Geochem Survey Completed At Remorse
TEM | Yalgoo Update: Extensional Geochem Survey Completed At Remorse
Key Points
●
●
●
>4km Remorse Copper Anomaly area open to the south now sampled
Ultrafine assays and multi-sensor scanning results due in July 2024
Ongoing fieldwork in the leadup to drilling
Summary
Tempest Minerals Ltd (TEM) is pleased to announce the completion of an extensional geochemistry sampling
at the Remorse Target. An untested but previously tenement-constrained area to the south of the main
copper anomaly has now been sampled. This area was identified as a high-priority task within ongoing
fieldwork leading up to a major drill program at the Remorse Target.
Yalgoo Project
Background
TEM holds more than 1,000km2 1 of highly prospective tenure in the Yalgoo Region of Western Australia 2.
The Company previously announced the presence of large-scale copper zinc anomalies at the Remorse
Target 3 that the Company is progressing towards drilling 4. The sampling area is one of a number of
exploration targets and extensional geochem survey areas that previously became apparent 5 as a result of
exploration works and were subsequently acquired in 2023 6.
Sampling
As part of ongoing fieldwork,
approximately 80 soil samples
were collected in an offset pattern
to match existing surrounding
sampling.
Samples will be Ultrafine assayed
in
conjunction
with
comprehensive scanning using
Boxscan technology.
Assays are expected to be
returned by July 2024 and
integrated into the greater dataset
in addition to drilling.
Next Steps
- Labwest Ultrafine assays of the collected samples
- Return of assays expected by July 2024
- Ongoing fieldwork in Yalgoo in preparation for drilling at Remorse
Tempest Minerals Ltd │ ACN 612 008 358
Phone: +61 8 9200 0435
Address: Level 2, Suite 9, 389 Oxford Street, Mt Hawthorn, WA 6016
Page 1 | 9
ASX : TEM
2024-05-29 | Yalgoo Update: Extensional Geochem Survey Completed At Remorse
The Board of the Company has authorised the release of this announcement to the market.
About TEM
Tempest Minerals Ltd is an Australian based mineral exploration company with a diversified portfolio of projects in
Western Australia considered highly prospective for precious, base and energy metals. The Company has an
experienced board and management team with a history of exploration, operational and corporate success.
Tempest leverages the team’s energy, technical and commercial acumen to execute the Company’s mission - to
maximise shareholder value through focussed, data-driven, risk-weighted exploration and development of our
assets.
Investor Information
investorhub.tempestminerals.com
TEM welcomes direct engagement and encourages shareholders and interested parties to visit the TEM
Investor hub which provides additional background information, videos and a forum for stakeholders to
communicate with each other and with the company.
Contact
For more information, please contact:
Don Smith
Managing Director
Level 2, Suite 9
389 Oxford Street
Mt Hawthorn,
Western Australia
6016
Website
Instagram
LinkedIn
Twitter
Youtube
Facebook
+61 892000435
Forward-looking statements
This document may contain certain forward-looking statements. Such statements are only predictions, based on certain
assumptions and involve known and unknown risks, uncertainties and other factors, many of which are beyond the company’s
control. Actual events or results may differ materially from the events or results expected or implied in any forward-looking
statement. The inclusion of such statements should not be regarded as a representation, warranty or prediction with respect to
the accuracy of the underlying assumptions or that any forward-looking statements will be or are likely to be fulfilled. Tempest
undertakes no obligation to update any forward-looking statement to reflect events or circumstances after the date of this
document (subject to securities exchange disclosure requirements). The information in this document does not take into
account the objectives, financial situation or particular needs of any person or organisation. Nothing contained in this document
constitutes investment, legal, tax or other advice.
Competent Person Statement
The information in this announcement that relates to Exploration Results and general project comments is based on information
compiled by Don Smith who is the Managind Director of Tempest Minerals Ltd. Don is a Member of AusIMM, AIG and GSA and
has sufficient experience relevant to the style of mineralisation under consideration and to the activities undertaken to qualify as
a Competent Person as defined in the 2012 Edition of the ‘Australasian Code for Reporting of Exploration Results, Mineral
Resources and Ore Reserves’. Don consents to the inclusion in the report of the matters based on his information in the form
and context in which it appears.
Page 2 | 9
ASX : TEM
2024-05-29 | Yalgoo Update: Extensional Geochem Survey Completed At Remorse
Appendix A: References
1.
2.
3.
4.
5.
6.
TEM ASX Announcement dated 15 February 2023 “Increase In Yalgoo Landholding”
TEM ASX Announcement dated 20 June 2023 “Regional Exploration update ”
TEM ASX Announcement dated 15 March 2023 “4km copper anomaly at Remorse Target”
TEM ASX Announcement dated 27 May 2024 “Expanded drill program at Remorse”
TEM ASX Announcement 21 August 2023 “Remorse Geochem and Heritage Partnership Commenced”
TEM ASX Announcement 15 February 2023 “Increase In Yalgoo Landholding”
Page 3 | 9
ASX : TEM
2024-05-29 | Yalgoo Update: Extensional Geochem Survey Completed At Remorse | JORC TABLE 1
Appendix B: JORC Table 1
Section 1 Sampling Techniques and Data
Criteria
Sampling
techniques
JORC Code explanation
Nature and quality of sampling (eg cut channels, random chips, or specific
specialised industry standard measurement tools appropriate to the minerals
under investigation, such as down hole gamma sondes, or handheld XRF
instruments, etc). These examples should not be taken as limiting the broad
meaning of sampling.
Include reference to measures taken to ensure sample representivity and the
appropriate calibration of any measurement tools or systems used.
Aspects of the determination of mineralisation that are Material to the Public
Report.
In cases where ‘industry standard’ work has been done this would be relatively
simple (eg ‘reverse circulation drilling was used to obtain 1 m samples from
which 3 kg was pulverised to produce a 30 g charge for fire assay’). In other
cases more explanation may be required, such as where there is coarse gold
that has inherent sampling problems. Unusual commodities or mineralisation
types (eg submarine nodules) may warrant disclosure of detailed information.
●
●
Drill type (eg core, reverse circulation, open-hole hammer, rotary air blast,
auger, Bangka, sonic, etc) and details (eg core diameter, triple or standard tube,
depth of diamond tails, face-sampling bit or other type, whether core is
oriented and if so, by what method, etc).
●
N/A
●
Method of recording and assessing core and chip sample recoveries and
results assessed.
Measures taken to maximise sample recovery and ensure representative
nature of the samples.
Whether a relationship exists between sample recovery and grade and whether
sample bias may have occurred due to preferential loss/gain of fine/coarse
material.
●
N/A
●
●
●
●
Drilling
techniques
Drill
sample
recovery
Commentary
●
●
Page 4 | 9
●
●
●
QAQC entailed a revolving Blank/Standard/Duplicate at every 20th
sample. The field duplicate was acquired by the sampler from the
same soil profile as the original sample.
300g sample collected from the top of the B horizon and placed into
a pulp bag for assay. A separate 1kg sample collected from the top
of the B horizon in the same profile collected for potential future
testing using different lab analysis. Both samples were unsieved as
per lab analysis requirements.
Sample bags were collected onsite and delivered to LabWest
Minerals Analysis in Perth by Tempest or contract personnel, and
were tested via UltraFine+ gold and multi element (50 elements)
assay method.
Soil samples are only used to determine the presence of gold plus
50 elements and are not used to determine mineral resources or
reserves.
ASX : TEM
2024-05-29 | Yalgoo Update: Extensional Geochem Survey Completed At Remorse | JORC TABLE 1
Logging
●
●
●
Sub-sampling
techniques and
sample
preparation
●
●
●
●
●
●
Quality of assay
data
and
laboratory tests
●
●
●
Verification of
sampling and
assaying
●
●
●
●
Whether core and chip samples have been geologically and geotechnically
logged to a level of detail to support appropriate Mineral Resource estimation,
mining studies and metallurgical studies.
Whether logging is qualitative or quantitative in nature. Core (or costean,
channel, etc) photography.
The total length and percentage of the relevant intersections logged.
●
Soils were qualitatively logged, including colour and texture.
If core, whether cut or sawn and whether quarter, half or all core taken.
If non-core, whether riffled, tube sampled, rotary split, etc and whether sampled
wet or dry.
For all sample types, the nature, quality and appropriateness of the sample
preparation technique.
Quality control procedures adopted for all sub-sampling stages to maximise
representivity of samples.
Measures taken to ensure that the sampling is representative of the in situ
material collected, including for instance results for field duplicate/second-half
sampling.
Whether sample sizes are appropriate to the grain size of the material being
sampled.
●
N/A
The nature, quality and appropriateness of the assaying and laboratory
procedures used and whether the technique is considered partial or total.
For geophysical tools, spectrometers, handheld XRF instruments, etc, the
parameters used in determining the analysis including instrument make and
model, reading times, calibrations factors applied and their derivation, etc.
Nature of quality control procedures adopted (eg standards, blanks, duplicates,
external laboratory checks) and whether acceptable levels of accuracy (ie lack
of bias) and precision have been established.
●
UltraFine+ analysis will be used to determine gold and multi-element
content. This method was chosen as it detects low levels of Au and
multi-elements within ultrafine (< 2 μm) fraction of soil samples.
UltraFine+ Leachwell is considered a partial method for gold
recoverable from cyanide..
All samples were submitted to LabWest Minerals Analysis in Perth
and were multi-element (50 elements) tested via UltraFine+ analysis
UFF-PE.
The verification of significant intersections by either independent or alternative
company personnel.
The use of twinned holes.
Documentation of primary data, data entry procedures, data verification, data
storage (physical and electronic) protocols.
Discuss any adjustment to assay data.
●
Page 5 | 9
●
●
N/A
ASX : TEM
2024-05-29 | Yalgoo Update: Extensional Geochem Survey Completed At Remorse | JORC TABLE 1
Location
data points
of
Accuracy and quality of surveys used to locate drill holes (collar and down-hole
surveys), trenches, mine workings and other locations used in Mineral
Resource estimation.
Specification of the grid system used.
Quality and adequacy of topographic control.
●
Data spacing for reporting of Exploration Results.
Whether the data spacing and distribution is sufficient to establish the degree
of geological and grade continuity appropriate for the Mineral Resource and
Ore Reserve estimation procedure(s) and classifications applied.
Whether sample compositing has been applied.
●
Samples were located on a grid oriented at 090 on a 200m line
spacing and 200m sample spacing, with each line offset 100m from
the other.
●
●
Whether the orientation of sampling achieves unbiased sampling of possible
structures and the extent to which this is known, considering the deposit type.
If the relationship between the drilling orientation and the orientation of key
mineralised structures is considered to have introduced a sampling bias, this
should be assessed and reported if material.
Soil sample points were located perpendicular to the general strike
of geological formations when they were encountered. Many
samples were acquired in areas with little to no surface geology.
●
The measures taken to ensure sample security.
●
Sample bags were collected onsite and moved directly to the
laboratory in Perth by Tempest or contract personnel and stored in a
secure facility in West Leederville.
●
The results of any audits or reviews of sampling techniques and data.
●
Results will be confirmed using company-led QA/QC, with standards,
blanks and duplicates inserted every 20th sample.
●
●
●
Data
spacing
and distribution
●
●
●
Orientation of
data in relation
to
geological
structure
Sample security
Audits
reviews
or
●
Page 6 | 9
●
Sample point locations collected by field data system utilising GPS
(±4m horizontal, up to 12m vertical error - however error was
consistently below 4m. )
Grid: Datum WGS84 UTM Zone 50S
ASX : TEM
2024-05-29 | Yalgoo Update: Extensional Geochem Survey Completed At Remorse | JORC TABLE 1
Section 2 Reporting of Exploration Results
(Criteria listed in the preceding section also apply to this section.)
Criteria
Mineral tenement
and land tenure
status
JORC Code explanation
Type, reference name/number, location and ownership including agreements
or material issues with third parties such as joint ventures, partnerships,
overriding royalties, native title interests, historical sites, wilderness or
national park and environmental settings.
The security of the tenure held at the time of reporting along with any known
impediments to obtaining a licence to operate in the area.
●
●
Acknowledgment and appraisal of exploration by other parties.
●
Tempest acknowledges the work by previous explorers including
Minjar, Goldfields Exploration Pty Ltd, Thundelarra Exploration Ltd,
and Royal Resources Ltd.
●
Deposit type, geological setting and style of mineralisation.
●
The project area lies over the easternmost interpreted extension of
the Yalgoo Greenstone belt within the Warriedar Fold Belt.
The Warriedar Fold Belt is known to comprise a folded sequence of
dolerite and gabbro intercalated with basalt, Banded Iron Formation
(BIF), sediments, and ultramafics. The area is known to host several
historical gold workings at the Pinyalling Mining Centre (8 km SSW of
the tenement area) where 958 ounces of gold was produced between
1902 - 1939 and later the Baron Rothschild project (pyrite and
pyrrhotite-associated gold-hosted BIF) explored by Thundelarra
Exploration during the late 1990s.
Extensive historic works have been conducted over the eastern
extension of the Yalgoo Greenstone belt just south of the sampling
area, and by correlation, can infer a deeper understanding of the
Ktulu Project geology supported by recent mapping. The main
geology consists of a basal sequence of mafic rocks overlain by a
thick sequence of felsic volcanic rocks, and later by jaspilitic BIF and
banded grey chert intercalated with felsic volcanics. This is
predominantly consistent with mapping conducted at the sampling
area, however due to extensive ground cover and heavily weathered
●
●
Exploration done
by other parties
Geology
Commentary
●
●
●
●
Page 7 | 9
All soil information quoted is from E5902465 and E5902479. This
lease is owned 100% by Warrigal Mining Pty Ltd which is a subsidiary
of Tempest Minerals Ltd.
No overriding interests are present to the Company’s knowledge.
Tempest acknowledges the traditional owners of the land.
ASX : TEM
2024-05-29 | Yalgoo Update: Extensional Geochem Survey Completed At Remorse | JORC TABLE 1
●
Drill
Information
hole
Data aggregation
methods
●
A summary of all information material to the understanding of the
exploration results including a tabulation of the following information for all
Material drill holes:
○ easting and northing of the drill hole collar
○ elevation or RL (Reduced Level – elevation above sea level in
metres) of the drill hole collar
○ dip and azimuth of the hole
○ down hole length and interception depth
○ hole length.
○ If the exclusion of this information is justified on the basis that the
information is not Material and this exclusion does not detract from
the understanding of the report, the Competent Person should
clearly explain why this is the case.
●
N/A
●
In reporting Exploration Results, weighting averaging techniques, maximum
and/or minimum grade truncations (eg cutting of high grades) and cut-off
grades are usually Material and should be stated.
Where aggregate intercepts incorporate short lengths of high grade results
and longer lengths of low grade results, the procedure used for such
aggregation should be stated and some typical examples of such
aggregations should be shown in detail.
The assumptions used for any reporting of metal equivalent values should
be clearly stated.
●
N/A
These relationships are particularly important in the reporting of Exploration
Results.
If the geometry of the mineralisation with respect to the drill hole angle is
known, its nature should be reported.
If it is not known and only the down hole lengths are reported, there should
be a clear statement to this effect (eg ‘down hole length, true width not
known’).
●
N/A
●
●
Relationship
between
mineralisation
widths
and
intercept lengths
outcrops, further drilling is required for a stronger understanding of
the local geology.
Geochemistry from soil sampling suggests potential VMS style
mineralisation across the main outcropping ridgeline (aka Remorse
Target). The Remorse target is a coincidental geophysical (magnetic
high and magnetic low) and geochemical (multi-elemental) anomaly.
●
●
●
Page 8 | 9
ASX : TEM
2024-05-29 | Yalgoo Update: Extensional Geochem Survey Completed At Remorse | JORC TABLE 1
Diagrams
Balanced reporting
Other substantive
exploration data
Further work
●
Appropriate maps and sections (with scales) and tabulations of intercepts
should be included for any significant discovery being reported. These
should include, but not be limited to a plan view of drill hole collar locations
and appropriate sectional views.
●
N/A
●
Where comprehensive reporting of all Exploration Results is not practicable,
representative reporting of both low and high grades and/or widths should
be practiced to avoid misleading reporting of Exploration Results.
●
N/A
●
Other exploration data, if meaningful and material, should be reported
including (but not limited to): geological observations; geophysical survey
results; geochemical survey results; bulk samples – size and method of
treatment; metallurgical test results; bulk density, groundwater, geotechnical
and rock characteristics; potential deleterious or contaminating substances.
●
N/A
●
The nature and scale of planned further work (eg tests for lateral extensions
or depth extensions or large-scale step-out drilling).
Diagrams clearly highlighting the areas of possible extensions, including the
main geological interpretations and future drilling areas, provided this
information is not commercially sensitive.
●
Tempest Minerals is progressing regulatory approvals and is
planning drill testing of the Remorse Target.
●
Page 9 | 9
Share your feedback
Discover