Greenstone belt and sulphides intersected in drilling
Released
Released
Announcement PDF
ASX : TEM
20201223 | Warriedar Exploration - Greenstone Discovery
TEM | Exploration Update - Greenstone belt and sulphides intersected in drilling
at Warriedar
Key Points
-
Drilling intersects sulphides, greenstones and potential new mineralization
Extensions to the Yalgoo Greenstone belt
Significant increase in project prospectivity
Assays pending
Warriedar Exploration Update
Tempest Minerals Ltd (TEM) is pleased to update the market on exciting exploration results from the
Company’s 100% Warriedar Project. Drilling at the Wee Lode prospect has intersected strongly altered silica
rich zones with possible sulphides present within a previously unrecognised greenstone sequence.
These intercepts are considered to be comparable in style to the mineralisation at other major gold mining
operations which are hosted in the same greenstone package and each have discovered resources in the
order of 1 million ounces.
Project
Background
The Warriedar West Project was acquired in December 2019 1 and is a large scale exploration project
targeting Intrusive Related Gold (IRG) and orogenic gold mineralisation with surface sampling indicating
several multi-square-kilometre anomalous zones 2 . Tempest recently announced the completion of drilling
for 2020 at the Warriedar West Project and initial results from the OK Corral prospect. 3
The second target zone in this program was the ‘Wee Lode’ prospect which was discovered in 2018 and is
defined by zones of strongly altered monzonite and mineralized quartz veining at surface and several
localised magnetic anomalies.
At least 5 major underutilized processing facilities are within trucking distance of the Warriedar Project with
existing direct transport routes already linking both the Minjar (~15km) and Silverlake Resources (ASX:SLK)
Rothsay (~45km) mines directly to this drill area.
Geology
The Warriedar project area is located within the Yalgoo-Singleton Greenstone Belt which is one of a number of
similar ‘greenstone belts’ located within the Murchison province of Western Australia 4 . The majority of the
project covers the ‘Walganna Suite’ which was previously mapped 5 as a late stage fine grained proterozoic
porphyritic monzogranite with greenstones flanking the intrusion. These supra-crustal rocks are in turn
bound by large scale granitoid batholiths - namely the Big Bell Suite to the east and the Yalgoo Dome to the
west.
Geophysical modelling 6 and the current drilling program have confirmed a conceptual framework based on
existing and emergent research on ‘mushroom diapirism’ 7 long considered a likelihood by the Tempest
technical team. The Walganna Suite is relatively thin within kilometres of its periphery and therefore
possesses enormous potential for shallow ‘under cover’ discoveries.
Tempest Minerals Ltd │ ACN 612 008 358
Phone: +61 8 9200 0435
Address: Level 2, Suite 9, 389 Oxford Street, Mt Hawthorn, WA 6016
Page 1 |
ASX : TEM
20201223 | Warriedar Exploration - Greenstone Discovery
Figure 1: Schematic cross section of newly confirmed greenstone sequence
Drilling
Drilling at the Warriedar West Project targeted highly altered Walganna Suite Monzogranite and selected
8
quartz vein outcrops associated with magnetic anomalies including the prospect known as Wee Lode.
Targeted step out RC drilling intersected 3m of mineralized quartz at the target depth of 10m confirming the
downdip continuation of the Wee Lode outcrop which previously yielded surface rock chips of up to 8gpt gold.
Multiple reconnaissance aircore holes at this prospect also encountered trace sulphides within the
weathering horizon.
5 holes into a magnetic anomaly at the prospect intersected a previously unrecorded greenstone sequence
including thick zones of rich magnetite, silica and other alteration assemblages consistent with
mineralisation found at large scale deposits in the region.
This latter discovery is particularly important as it has changed the known geology of the Warriedar Region
and significantly expanded the target space for orogenic gold.
All samples have been submitted to Intertek laboratories and results are pending.
Page 2 |
ASX : TEM
20201223 | Warriedar Exploration - Greenstone Discovery
Figure 2: RC chips from WARDH30 and WARDH31
Implications
The combination of the updated geological model based on remodelled geophysics and the material
intersected downhole in this drilling program has altered the existing geological interpretation of the entire
region including connecting Warriedar and Meleya geologically. This has resulted in large areas of the project
- already prospective - to be significantly more prospective for orogenic gold, providing more chance for
discovery. Tempest has multiple high priority drill targets generated as a result of this work which are
currently being assessed and prioritised for the drilling in 2021.
Figure 3: Wee Lode prospect in regional context and extension of greenstone (purple)
Page 3 |
ASX : TEM
20201223 | Warriedar Exploration - Greenstone Discovery
Next Steps
-
Results of remaining assays expected in January 2021
Messenger Project exploration update
Assessment and prioritization of targets for drilling in 2021
The Board of the Company has authorised the release of this announcement to the market.
About TEM
Tempest Minerals Ltd is an Australian based mineral exploration company with a diversified portfolio of
projects in Western Australia considered highly prospective for precious, base and energy metals.
The Company has an experienced board and management team with a history of exploration, operational and
corporate success.
Tempest leverages the team’s energy, technical and commercial acumen to execute the Company’s mission to maximize shareholder value through focussed, data-driven, risk-weighted exploration and development of
our assets.
Contact
For more information, please contact:
Don Smith
Managing Director
Level 2, Suite 9
389 Oxford Street
Mt Hawthorn,
Western Australia
6016
+61 892000435
www.tempestminerals.com
LinkedIn
Instagram
Twitter
Facebook
Page 4 |
ASX : TEM
20201223 | Warriedar Exploration - Greenstone Discovery
Forward-looking statements
This document may contain certain forward-looking statements. Such statements are only predictions, based
on certain assumptions and involve known and unknown risks, uncertainties and other factors, many of which
are beyond the company’s control. Actual events or results may differ materially from the events or results
expected or implied in any forward-looking statement.
The inclusion of such statements should not be regarded as a representation, warranty or prediction with
respect to the accuracy of the underlying assumptions or that any forward-looking statements will be or are
likely to be fulfilled. Tempest undertakes no obligation to update any forward-looking statement to reflect
events or circumstances after the date of this document (subject to securities exchange disclosure
requirements).
The information in this document does not take into account the objectives, financial situation or particular
needs of any person or organisation. Nothing contained in this document constitutes investment, legal, tax or
other advice.
Competent Person Statement
The information in this announcement that relates to Exploration Results and general project comments is
based on information compiled by Don Smith who is the Managing Director of Tempest Mineral Ltd. Don
Smith is a Member of AusIMM and AIG and has sufficient experience relevant to the style of mineralisation
under consideration and to the activities undertaken to qualify as a Competent Person as defined in the 2012
Edition of the ‘Australasian Code for Reporting of Exploration Results, Mineral Resources and Ore Reserves’.
Don Smith consents to the inclusion in the report of the matters based on his information in the form and
context in which it appears.
Page 5 |
ASX : TEM
20201223 | Warriedar Exploration - Greenstone Discovery
Appendix 1 - References
1. ASX Announcement dated 13 December 2019 “Completion of Warrigal Mining Acquisition”
2. ASX Announcement dated 20 April 2020 “Warriedar Exploration Update - Large gold anomaly
identified
3. ASX Announcement dated 21 December 2020 “Gold at OK Corral & Completion of drilling for 2020”
4. Myers, J., and Watkins, K. P. (1985). Origin of Granite – Greenstone Patterns, Yilgarn Block, W.A.
Geology 13, p778-780.
5. Zibra I, Ivanic TJ et al (2015) Thundelarra Sheet 2340, Geological Survey of Western Australia
1:100,000 Geological Series
6. ASX Announcment dated 18 August 2020 “Meleya Zone Targets Identified From New Geophysical
Data”
7. Jackson M.P.A., Talbot C.J. (1989) Anatomy of mushroom-shaped diapirs. Journal of Structural
Geology vol. 11, pages 211-230
8. ASX Announcement dated 13 October 2020 “Tempest to commence drilling at the Warriedar West
Project”
Page 6 |
ASX : TEM
20201223 | Warriedar Exploration - Greenstone Discovery
Appendix 2 - Interim Drill Results
Hole ID
East
North
Depth (m)
Assays
Geology
Dip
Direction
Hole
(m)
depth
54
290
19
RC
Hole type
Wee Lode
WARDH00013
509674
68701115
Pending
Altered
Monzonite
quartz lode
WARDH00024
509712
6801095
Pending
Altered
Monzonite
60
290
22
RC
WARDH00019
509702
6801071
Pending
Altered
Monzonite
62
266
20
RC
264
64
32
RC
+
WARDH00020
509704
6801053
Pending
Altered
Monzonite
WARDH00023
509611
6801084
Pending
Altered
Monzonite
282
60
27
RC
WARDH00022
509421
6801998
Pending
Altered
Monzonite
270
64
18
RC
WARDH00025
509449
6801009
Pending
Altered
Monzonite
282
56
26
RC
WARDH00026
509612
6801015
Pending
Altered
Monzonite
280
56
22
RC
58
51
RC
WARDH00030
510749
6801203
Pending
Alt. monzonite,
greenstone
0
WARDH00031
510750
6800887
Pending
Greenstone
8
56
37
RC
WARDH00032
510745
6801113
Pending
Greenstone
354
60
35
RC
WARDH00033
510801
6801190
Pending
Greenstone
356
60
27
RC
WARDH00034
510801
6801143
Pending
Greenstone
0
60
14
RC
Page 7 |
JORC Code, 2012 Edition – Table 1 report template
Section 1 Sampling Techniques and Data
(Criteria in this section apply to all succeeding sections.)
Criteria
JORC Code explanation
Commentary
Sampling
techniques
● Nature and quality of sampling (eg cut channels, random chips, or
specific specialised industry standard measurement tools appropriate
to the minerals under investigation, such as down hole gamma
sondes, or handheld XRF instruments, etc). These examples should
not be taken as limiting the broad meaning of sampling.
● Include reference to measures taken to ensure sample representivity
and the appropriate calibration of any measurement tools or systems
used.
● Aspects of the determination of mineralisation that are Material to the
Public Report.
● In cases where ‘industry standard’ work has been done this would be
relatively simple (eg ‘reverse circulation drilling was used to obtain 1
m samples from which 3 kg was pulverised to produce a 30 g charge
for fire assay’). In other cases more explanation may be required,
such as where there is coarse gold that has inherent sampling
problems. Unusual commodities or mineralisation types (eg
submarine nodules) may warrant disclosure of detailed information.
●
●
●
●
●
●
●
Drilling
techniques
● Drill type (eg core, reverse circulation, open-hole hammer, rotary air
blast, auger, Bangka, sonic, etc) and details (eg core diameter, triple
or standard tube, depth of diamond tails, face-sampling bit or other
type, whether core is oriented and if so, by what method, etc).
1
●
●
DRILLING WARDH00030 - WARDH00031, WARDH00032,
WARDH00033, WARDH00034
Five Reverse Circulation (RC) / Air Core (AC) holes were drilled
for a total of 164m.
Drilled material were collected in 1 m intervals with
approximately 1kg recovered and placed in labelled bags. The
bagged sample was speared and scooped in at least 3 different
directions to gain a representative sample for laboratory
analysis.
Samples are submitted to Intertek Perth:
All samples submitted for assay undergo fine crush and
pulverisation to 75 microns (PU02). Assays were carried out on
a split 50 to 100 g fraction. Remaining pulps are preserved.
All samples are analysed for 48 elements using a Four Acid
digest followed by a 50g fire assay for Gold using ICP-MS.
Reanalyses are conducted on select samples (one every twenty
samples) to investigate gold assay repeatability. No significant
gold assay variations were observed to signify data quality
issues.
Holes were drilled by Gold Tip Drilling, utilising a Gemco H-13
reverse circulation truck-mounted drill rig.
Holes were collared into hard caprock by using a reverse
circulation face sampling hammer. Soft clay was drilled by
switching to the air core technique, which uses a blade to
produce broken core and large chips.
Drill sample
recovery
Logging
Sub-sampling
techniques
and sample
preparation
● Method of recording and assessing core and chip sample recoveries
and results assessed.
● Measures taken to maximise sample recovery and ensure
representative nature of the samples.
● Whether a relationship exists between sample recovery and grade
and whether sample bias may have occurred due to preferential
loss/gain of fine/coarse material.
● Whether core and chip samples have been geologically and
geotechnically logged to a level of detail to support appropriate
Mineral Resource estimation, mining studies and metallurgical
studies.
● Whether logging is qualitative or quantitative in nature. Core (or
costean, channel, etc) photography.
● The total length and percentage of the relevant intersections logged.
● If core, whether cut or sawn and whether quarter, half or all core
taken.
● If non-core, whether riffled, tube sampled, rotary split, etc and
whether sampled wet or dry.
● For all sample types, the nature, quality and appropriateness of the
sample preparation technique.
● Quality control procedures adopted for all sub-sampling stages to
maximise representivity of samples.
● Measures taken to ensure that the sampling is representative of the in
situ material collected, including for instance results for field
duplicate/second-half sampling.
● Whether sample sizes are appropriate to the grain size of the material
being sampled.
●
●
●
●
●
●
●
●
●
●
●
●
Quality of
assay data
and
laboratory
tests
● The nature, quality and appropriateness of the assaying and
laboratory procedures used and whether the technique is considered
partial or total.
● For geophysical tools, spectrometers, handheld XRF instruments, etc,
the parameters used in determining the analysis including instrument
make and model, reading times, calibrations factors applied and their
derivation, etc.
● Nature of quality control procedures adopted (eg standards, blanks,
2
●
●
Sample recoveries were generally in excess of 80%. Recovery
dropped in the shallow portion of holes and in zones of strong
water inflow.
In zones where recovery was compromised holes were
terminated.
No sample recovery bias has been noted.
All drill chips were geologically logged by Galt Mining Solution
Geologists.
Drill chips were collected, wet and dry, for each hole and placed
in trays prior to being photographed.
Each drill hole was qualitatively logged in its entirety for geology.
Samples consist of AC and RC drill chips.
Drill chip samples were taken at one metre intervals with a
spear.
Sample collection methodology and sample size is considered
appropriate to the target-style and drill method, and appropriate
laboratory analytical methods were employed.
Standard reference samples were inserted into the laboratory
submissions at a rate of 1 per 50 samples. Duplicates were
taken at a rate of 1 per 20 samples.
The average sample weight submitted to the lab was 1.2kg.
Sample sizes submitted for analysis were appropriate for the
style of mineralisation sought.
The method of sample collection and laboratory methods are
appropriate for this style of mineralisation.
All samples are analysed for 48 elements using a Four Acid
digest (4A/MS48) followed by a 50g fire assay for Gold using
ICP-MS (FA50/MS02).
Standard reference samples and blanks are inserted at 50
sample intervals. Intertek also maintained a comprehensive
QAQC regime, including check samples, duplicates, standard
duplicates, external laboratory checks) and whether acceptable levels
of accuracy (ie lack of bias) and precision have been established.
Verification of
sampling and
assaying
● The verification of significant intersections by either independent or
alternative company personnel.
● The use of twinned holes.
● Documentation of primary data, data entry procedures, data
verification, data storage (physical and electronic) protocols.
● Discuss any adjustment to assay data.
Location of
data points
● Accuracy and quality of surveys used to locate drill holes (collar and
down-hole surveys), trenches, mine workings and other locations
used in Mineral Resource estimation.
● Specification of the grid system used.
● Quality and adequacy of topographic control.
Data spacing
and
distribution
● Data spacing for reporting of Exploration Results.
● Whether the data spacing and distribution is sufficient to establish the
degree of geological and grade continuity appropriate for the Mineral
Resource and Ore Reserve estimation procedure(s) and
classifications applied.
● Whether sample compositing has been applied.
Orientation of
data in
relation to
geological
structure
● Whether the orientation of sampling achieves unbiased sampling of
possible structures and the extent to which this is known, considering
the deposit type.
● If the relationship between the drilling orientation and the orientation
of key mineralised structures is considered to have introduced a
sampling bias, this should be assessed and reported if material.
Sample
security
● The measures taken to ensure sample security.
Audits or
reviews
● The results of any audits or reviews of sampling techniques and data.
reference samples, blanks and calibration standards. Assays
results are pending.
●
●
All assays have been verified by alternate company personnel.
Assay files will be received electronically.
●
Datum used is UTM WGS84 Zone 50. Location of collars was
measured with GPS with an accuracy of less than 4 m.
RL information was measured by GPS with an accuracy of less
than 4 m.
●
●
●
●
●
Drill holes were oriented as close to perpendicular as possible to
the interpreted orientation of the target based on available
magnetic data.
No bias related to hole orientation has been observed.
●
Pre-numbered bags were used and sealed on site, then sealed
samples were transported to Intertek Perth by Galt Mining
Solutions personnel.
●
The dataset associated with this reported exploration has been
subject to data import validation.
Assay results are pending.
No external audits have been conducted.
●
●
3
The spacing between drill holes is variable but generally of 50 m
E-W and 40 m N-S.
Sample composites were generally not used.
Section 2 Reporting of Exploration Results
(Criteria listed in the preceding section also apply to this section.)
Criteria
JORC Code explanation
Commentary
Mineral
tenement and
land tenure
status
● Type, reference name/number, location and ownership including
agreements or material issues with third parties such as joint
ventures, partnerships, overriding royalties, native title interests,
historical sites, wilderness or national park and environmental
settings.
● The security of the tenure held at the time of reporting along with any
known impediments to obtaining a licence to operate in the area.
● Granted Exploration Licenses E59/2308 and E59/2374. Tenement
holder is Warrigal Mining Pty Ltd (100%) which is a subsidiary of
Tempest Minerals Limited.
Exploration
done by other
parties
● Acknowledgment and appraisal of exploration by other parties.
● There is no evidence to demonstrate that the related area has been
previously explored/appraised.
Geology
● Deposit type, geological setting and style of mineralisation.
● This exploration is targeting IRG and/or shear zone-hosted deposits
in an altered monzonite intruding an Archean greenstone belt. This
scouting campaign targets an E-W magnetic anomaly expected to
correspond to greenstone formation buried under the altered
monzonite. The goal of this campaign is to demonstrate the
occurrence of greenstone under the intrusive.
Drill hole
Information
● A summary of all information material to the understanding of the
exploration results including a tabulation of the following information
for all Material drill holes:
o easting and northing of the drill hole collar
o elevation or RL (Reduced Level – elevation above sea level in
metres) of the drill hole collar
o dip and azimuth of the hole
o down hole length and interception depth
o hole length.
● If the exclusion of this information is justified on the basis that the
information is not Material and this exclusion does not detract from
the understanding of the report, the Competent Person should clearly
explain why this is the case.
● See table appended
Data
aggregation
methods
● In reporting Exploration Results, weighting averaging techniques,
maximum and/or minimum grade truncations (eg cutting of high
grades) and cut-off grades are usually Material and should be stated.
● Where aggregate intercepts incorporate short lengths of high grade
● Assay results are pending.
4
● No known factors exist that limit the ability for Tempest Minerals to
operate within these granted exploration tenements.
results and longer lengths of low grade results, the procedure used
for such aggregation should be stated and some typical examples of
such aggregations should be shown in detail.
● The assumptions used for any reporting of metal equivalent values
should be clearly stated.
Relationship
between
mineralisation
widths and
intercept
lengths
● These relationships are particularly important in the reporting of
Exploration Results.
● If the geometry of the mineralisation with respect to the drill hole
angle is known, its nature should be reported.
● If it is not known and only the down hole lengths are reported, there
should be a clear statement to this effect (eg ‘down hole length, true
width not known’).
● Only down hole lengths are reported, the true width is unknown.
Diagrams
● Appropriate maps and sections (with scales) and tabulations of
intercepts should be included for any significant discovery being
reported These should include, but not be limited to a plan view of
drill hole collar locations and appropriate sectional views.
● See appended figure(s)
Balanced
reporting
● Where comprehensive reporting of all Exploration Results is not
practicable, representative reporting of both low and high grades
and/or widths should be practiced to avoid misleading reporting of
Exploration Results.
● All results are presented
Other
substantive
exploration
data
● Other exploration data, if meaningful and material, should be reported
including (but not limited to): geological observations; geophysical
survey results; geochemical survey results; bulk samples – size and
method of treatment; metallurgical test results; bulk density,
groundwater, geotechnical and rock characteristics; potential
deleterious or contaminating substances.
● Drill holes were located and oriented based on magnetic data
showing an E-W oriented positive anomaly.
Further work
● The nature and scale of planned further work (eg tests for lateral
extensions or depth extensions or large-scale step-out drilling).
● Diagrams clearly highlighting the areas of possible extensions,
including the main geological interpretations and future drilling areas,
provided this information is not commercially sensitive.
● The intention is to continue to test for the source of the km scale
elevated gold-in-soil and pathfinder assays through field and desktop
studies.
5
● Multi-element data related to surface soil sampling have been
collected and will be presented in future press releases.
● This will include analysing existing multi-element assay data, field
mapping and assessments of potential field/remote sensing data to
refine and design exploration drill targets.
Share your feedback
Discover