New Mozambique Lithium Licences
Released
Released
Announcement PDF
New Mozambique Lithium Licenses
ASX: Li3
9 July 2019
•
Expansion of land position through the grant of three
additional licenses, including the strategically significant
9166L license
•
Outcropping pegmatites have significant potential for
extensions at shallow depths, which can be confirmed
through modern lithium-focussed exploration
•
Mozambique is on the east coast of Africa, with multiple
bulk-handling ports and well-developed road and rail
infrastructure for mining
•
Mozambique is a pro-mining jurisdiction
•
Li3 remains the first and only ASX listed company to enter
Mozambique for hard rock lithium
Further to the announcement dated 25th March 2019 Lithium Consolidated Ltd
(“Lithium Consolidated”, “Li3” or the “Company”) is pleased to announce it has
been granted three (3) new lithium exploration licenses in the Alto Ligonha Pegmatite
Province in northern Mozambique (the “Mozambique Licenses” or “Licenses”) (see
Figure 1).
The three (3) newly granted Licenses are in addition to the two (2) Licenses, which
were granted and announced on 25 March 2019, such that the Company now holds a
total of five (5) Licenses over an area of 31,481 ha (314.8 km2) in the Alto Ligonha
Pegmatite Province (“ALPP”) in Mozambique.
The ALPP contains a large concentration of pegmatites, including many examples of
Lithium Caesium Tantalum (“LCT”) family of pegmatites, which have been mined since
the 1920’s.
Mozambique was the world’s second largest beryl producer in the 1960’s, but the
lithium-bearing minerals were not exploited from the same pegmatites during the
historical beryl and tantalite mining.
The ALPP’s current exploration maturity is analogous to that which existed in the Pilbara
and Yilgarn Craton pegmatites of Western Australia, approximately 10 years or so ago,
prior to the modern lithium-focused exploration, which resulted in the definition of large
lithium resources in the Pilgangoora, Wodgina, and Earl Grey pegmatites.
Northern Mozambique has well-developed infrastructure for mining. The Mozambique
Licenses are in close proximity to the Mocuba – Nampula main road, a sealed, all
weather road. The recently upgraded Nacala railway corridor connects Nampula to the
natural deep-water port of Nacala, which is the principal port for the export of coal from
mining operations at Moatize.
Figure 1. License areas and regional infrastructure within the Alto Ligonha
Pegmatite Province, Mozambique. Shown over Google satellite imagery.
Table 1. ALPP Granted Exploration Licenses
License
Status
No. of
Licenses
1.
License 9167 L
Granted
1
7,137 ha
Tantalite and beryl
2.
License 9190 L
Granted
1
3,840 ha
Beryl and tantalite
3.
License 9166 L
Granted
1
91 ha
4.
License 9168 L
Granted
1
2,743 ha
Beryl and tantalite –
columbite series minerals
5.
License 9188 L
Granted
1
17,670 ha
Possible beryl and raremetal minerals
5(a)
31,481 ha
Total
Area
Historical or artisanal
mining
None recorded
Note:
(a)
Additional Licenses under application for new areas of interest.
License 9166 L
License 9166 L is located approximately 50km northeast of Alto Molocue and is situated
on an interpreted pegmatite not recorded in prior maps of the region (Figure 2).
The area comprises undifferentiated rocks of the Nampula Complex, banded biotite
gneisses and migmatitic biotite gneisses.
Satellite imagery interpretation and analysis has identified extensive artisanal workings
which appear to be located on a potentially large pegmatite body. The extent of the
artisanal workings and the spectral response within the satellite imagery indicates the
possibility of a large pegmatite body within the license area that requires field checking.
Figure 2. License 9166 L – Location plan with interpreted pegmatite over
ESRI satellite imagery
License 9168L
License 9168L is located in the northeast of the ALPP within the Alto Ligonha pegmatite
field (Figure 3a and b) in close proximity to License 9190L.
The host rocks to the pegmatites largely comprise of gneisses from the Mamala Gneiss,
the Molócuè Group and the Culicui Suite of the Nampula Complex.
The Molócuè Group comprises metapelites and metapsammites with subordinate
interlayered marble, calc-silicates, felsic and mafic rocks and host the majority of the
known lithium mineralized pegmatites in the region. The younger granites of the
Murrupula Suite are considered to be associated with the pegmatites, and outcrop to
the east of the license area.
Tracts of artisanal workings have been interpreted from satellite imagery over four (4)
distinct areas within the license boundaries. Three (3) of these are over pegmatites
within the Ingela pegmatite occurrence.
Beryl and tantalite-columbite series minerals have been reported from the Ingela
pegmatites.
Figure 3a. License 9168 L – Location plan with interpreted pegmatites and
geology
Figure 3b. License 9168 L – Location plan with interpreted pegmatites
overlain on Google satellite imagery
License 9188 L
License 9188 L is located in the northern part of the ALPP within the Nauela Pegmatite
Field (Figure 4a and b).
The license area is largely underlain by granitic gneisses from the Culicui Suite. Other
rock types within the area include amphibolite, mafic gneisses, and various biotite
gneisses from the Mocuba complex.
Three pegmatite clusters are known within the large license area: Guilherme, Malapa,
and Muetia. Two of these have been identified as having workings over them through
satellite imagery interpretation. Only a small number of features representing possible
workings can be interpreted in the area of the Muetia cluster. The pegmatites are
described as belonging to the sodalithic class (which corresponds to the LCT family of
pegmatites).
Figure 4a. License 9188 L – Location plan with interpreted pegmatites and
geology
Figure 4b. License 9188 L – Location plan with interpreted pegmatites over
ESRI satellite imagery
Alto Ligonha Pegmatite Province Geology
The Alto Ligonha Pegmatite Province has:
•
•
•
Pegmatites famous for their gemstones, rare-element minerals such as beryl,
columbo-tantalite, and for being a source of rare and unique mineral specimens.
Certain of these pegmatites also contain lithium minerals that have not previously
been exploited;
outcropping pegmatites, including a number of abandoned historical workings,
which have significant potential for extensions at shallow depths, which can be
realized through modern lithium-focused exploration; and
the potential for delineation of larger, pegmatite hosted lithium mineralisation
through modern lithium-focused exploration.
The Alto Ligonha Pegmatite Province is largely located in the NNE - SSW trending
Namama Thrust Belt/Shear Zone and extends from Mocuba in the southwest to
approximately 100km northeast of Alto Molocue in the northeast in the Zambézia
Province of northern Mozambique (Figure 5).
The geology is dominated by rocks of the Nampula Complex within the Mesoproterozoic
Mozambique Belt, predominantly medium to high-grade gneisses. These rocks were
reworked during the Pan-African Orogeny involving the amalgamation of east and west
Gondwana. The orogeny involved the emplacement of several nappe sheets, which have
been preserved, followed by deformation, metamorphism and granitic magmatism. The
pegmatites were emplaced late to post-orogenic and are distributed in four main zones,
of which three coincide with major structural features (see Figure 5).
Figure 5 – Geology of the ALPP (Source: Macey et al, 2010)
Many of the pegmatites have characteristics of the LCT family, and some have
characteristics of the NYF (Niobium-Yttrium-Fluorine) family. The LCT family can be
further subdivided into sodalithic and potassic beryl types, corresponding to the
Complex and the Beryl types of Cerny (1991) respectively. Both of these types can be
defined to belong to the Lithium subclass of the Rare-Element pegmatites. The sodalithic
type pegmatites considered to be the most prospective for lithium mineralization. Other
types of pegmatites present include potassic rare-earth amazonite and tourmaline
bearing sub-types (which belong to a mixed NYF-LCT family of pegmatites) and do not
contain lithium mineralization.
The ALPP is known to contain several large sodalithic-type pegmatites (LCT pegmatites)
that are currently being mined on a small scale, and which were previously mined for
tantalite and gemstones. A number of these are currently also being explored for their
lithium potential.
The sodalithic pegmatites are preferentially hosted in the paragneisses of the Molócuè
Group which comprises metapelites and metapsammites with subordinate interlayered
marble, calc-silicates, felsic and mafic rocks.
The Company’s exploration focus will be on the definition and capture of large,
previously unexplored or previously under-explored pegmatites of the sodalithic type,
with an emphasis on definition of unmined, concealed, shallow extensions.
Potential targets have been identified through historical data, satellite imagery
interpretation and exploration programmes will now be focused on systematic mapping,
sampling, and if initial appraisal is encouraging, evaluation through drilling.
For more information, please contact:
Duncan Cornish
Company Secretary
Phone: +61 7 3212 6299
Email: investors@li3limited.com
Please visit us at: www.li3limited.com
Cautionary Statements
Forward-looking statements
This document may contain certain forward-looking statements. Such statements are
only predictions, based on certain assumptions and involve known and unknown risks,
uncertainties and other factors, many of which are beyond the company’s control.
Actual events or results may differ materially from the events or results expected or
implied in any forward-looking statement.
The inclusion of such statements should not be regarded as a representation, warranty
or prediction with respect to the accuracy of the underlying assumptions or that any
forward-looking statements will be or are likely to be fulfilled. Li3 undertakes no
obligation to update any forward-looking statement to reflect events or circumstances
after the date of this document (subject to securities exchange disclosure
requirements).
The information in this document does not take into account the objectives, financial
situation or particular needs of any person or organisation. Nothing contained in this
document constitutes investment, legal, tax or other advice.
Competent Person’s Statement:
The information in this announcement that relates to the geological descriptions of the
Mozambique Licenses (Appendix 1) is based on information compiled by Michael
Cronwright, a Competent Person who is a fellow of The Geological Society of South
Africa and Pr. Sci. Nat. (Geological Sciences) registered with the South African Council
for Natural Professions. Mr Cronwright is a Principal Consultant with CSA Global in South
Africa. Mr Cronwright has sufficient experience relevant to the style of mineralisation
and type of deposit under consideration and to the activity he is undertaking to qualify
as a Competent Person as defined in the 2012 Edition of “Australasian Code for
Reporting of Exploration Results, Mineral Resources and Ore Reserves”. Mr Cronwright
consents to the inclusion in the report of the matters based on his information in the
form and context in which it appears.
Glossary of selected geological terms:
Amazonite and Tourmaline-bearing Pegmatite: a sub-type of the LCT pegmatite
family containing green feldspar (amazonite) and tourmaline.
Potassic-Beryl-Pegmatite: a sub-class of the LCT pegmatite family containing Be (as
beryl) and Nb-Ta (as the “columbite-tantalite” mineral series).
Potassic-REE-Pegmatite: a sub-class of the NYF pegmatite family typically rich in
metamict (non-crystalline) U, Th, and rare-earth-element (REE) bearing minerals.
Sodalithic Pegmatite: a sub-class of the LCT pegmatite family, typically containing
Nb-Ta (as the “columbite-tantalite” mineral series), Be (as beryl) and Li (in a number
of minerals, including spodumene or petalite) corresponding to the “Complex Type” of
the Rare Element Class of the LCT family of pegmatites.
LITHIUM CONSOLIDATED LTD
ACN 612 008 358
Phone: +61 7 3212 6299
Fax: +61 7 3212 6250
Address: Level 6, 10 Market Street, Brisbane QLD 4000
Appendix 1: JORC Code, 2012 Edition – Table 1 report
Section 1 Sampling Techniques and Data
(Criteria in this section apply to all succeeding sections.)
Criteria
JORC Code explanation
Commentary
Sampling techniques
Nature and quality of sampling
(eg cut channels, random
chips, or specific specialised
industry standard
measurement tools appropriate
to the minerals under
investigation, such as down
hole gamma sondes, or
handheld XRF instruments,
etc). These examples should
not be taken as limiting the
broad meaning of sampling.
NA, no sampling conducted at
this stage.
Include reference to measures
taken to ensure sample
representivity and the
appropriate calibration of any
measurement tools or systems
used
NA, no sampling conducted at
this stage.
Aspects of the determination of
mineralisation that are Material
to the Public Report.
NA, no sampling conducted at
this stage.
In cases where ‘industry
standard’ work has been done
this would be relatively simple
(eg ‘reverse circulation drilling
was used to obtain 1 m
samples from which 3 kg was
pulverised to produce a 30 g
charge for fire assay’). In other
cases more explanation may
be required, such as where
there is coarse gold that has
inherent sampling problems.
Unusual commodities or
mineralisation types (eg
submarine nodules) may
warrant disclosure of detailed
information
Drilling techniques
Drill type (eg core, reverse
circulation, open-hole hammer,
rotary air blast, auger,
Bangka, sonic, etc) and details
(eg core diameter, triple or
standard tube, depth of
diamond tails, face-sampling
bit or other type, whether core
NA, no drilling conducted at
this stage.
Criteria
JORC Code explanation
Commentary
is oriented and if so, by what
method, etc).
Drill sample recovery
Logging
Sub-sampling
techniques and sample
preparation
Method of recording and
assessing core and chip
sample recoveries and results
assessed.
NA, no drilling conducted at
this stage.
Measures taken to maximise
sample recovery and ensure
representative nature of the
samples.
NA, no drilling conducted at
this stage.
Whether a relationship exists
between sample recovery and
grade and whether sample bias
may have occurred due to
preferential loss/gain of
fine/coarse material.
NA, no drilling conducted at
this stage.
Whether core and chip samples
have been geologically and
geotechnically logged to a level
of detail to support appropriate
Mineral Resource estimation,
mining studies and
metallurgical studies.
NA, no drilling conducted,
nothing to log at this stage.
Whether logging is qualitative
or quantitative in nature. Core
(or costean, channel, etc)
photography.
NA, no drilling conducted,
nothing to log at this stage.
The total length and
percentage of the relevant
intersections logged.
NA, no drilling conducted,
nothing to log at this stage.
If core, whether cut or sawn
and whether quarter, half or all
core taken.
NA, no drilling conducted. No
core to sample at this stage.
If non-core, whether riffled,
tube sampled, rotary split, etc
and whether sampled wet or
dry.
For all sample types, the
nature, quality and
appropriateness of the sample
preparation technique.
Criteria
Quality of assay data
and laboratory tests
Verification of sampling
and assaying
JORC Code explanation
Commentary
Quality control procedures
adopted for all sub-sampling
stages to maximise
representivity of samples.
NA, no drilling conducted, no
sampling conducted at this
stage.
Measures taken to ensure that
the sampling is representative
of the in situ material
collected, including for
instance results for field
duplicate/second-half
sampling.
NA, no drilling conducted, no
sampling conducted at this
stage.
Whether sample sizes are
appropriate to the grain size of
the material being sampled
NA, no drilling conducted, no
sampling conducted at this
stage.
The nature, quality and
appropriateness of the
assaying and laboratory
procedures used and whether
the technique is considered
partial or total.
NA, no sampling conducted,
nothing to assay at this stage.
For geophysical tools,
spectrometers, handheld XRF
instruments, etc, the
parameters used in
determining the analysis
including instrument make and
model, reading times,
calibrations factors applied and
their derivation, etc.
NA, no other tools have been
used at this stage.
Nature of quality control
procedures adopted (eg
standards, blanks, duplicates,
external laboratory checks)
and whether acceptable levels
of accuracy (ie lack of bias)
and precision have been
established.
NA, not necessary at this
stage as no drilling or
sampling has been
undertaken.
The verification of significant
intersections by either
independent or alternative
company personnel.
NA, not relevant at this stage.
Criteria
JORC Code explanation
Commentary
The use of twinned holes.
Location of data points
Data spacing and
distribution
Orientation of data in
relation to geological
structure
Documentation of primary
data, data entry procedures,
data verification, data storage
(physical and electronic)
protocols.
NA, not necessary at this
stage.
Discuss any adjustment to
assay data.
NA, not relevant at this stage.
Accuracy and quality of
surveys used to locate drill
holes (collar and down-hole
surveys), trenches, mine
workings and other locations
used in Mineral Resource
estimation.
NA, no data points to record
at this stage.
Specification of the grid
system used.
All co-ordinates are recorded
in the WGS84 datum, UTM 37
South Zone, unless otherwise
specified.
Quality and adequacy of
topographic control
NA, not relevant at this stage.
Data spacing for reporting of
Exploration Results.
NA, no data points at this
stage.
Whether the data spacing and
distribution is sufficient to
establish the degree of
geological and grade continuity
appropriate for the Mineral
Resource and Ore Reserve
estimation procedure(s) and
classifications applied.
NA, not relevant at this stage.
Whether sample compositing
has been applied.
NA, not relevant at this stage.
Whether the orientation of
sampling achieves unbiased
sampling of possible structures
and the extent to which this is
known, considering the deposit
type.
NA, no sampling conducted at
this stage.
Criteria
JORC Code explanation
Commentary
If the relationship between the
drilling orientation and the
orientation of key mineralised
structures is considered to
have introduced a sampling
bias, this should be assessed
and reported if material.
NA, no drilling conducted at
this stage.
Sample security
The measures taken to ensure
sample security.
NA, no sampling conducted at
this stage.
Audits or reviews
The results of any audits or
reviews of sampling techniques
and data.
NA, not relevant at this stage.
No site visit has been
conducted.
Section 2 Reporting of Exploration Results
(Criteria listed in the preceding section also apply to this section.)
Criteria
JORC Code explanation Commentary
Mineral tenement and
land tenure status
Exploration done by
other parties
Type, reference
name/number, location and
ownership including
agreements or material
issues with third parties
such as joint ventures,
partnerships, overriding
royalties, native title
interests, historical sites,
wilderness or national park
and environmental settings.
Li3 through its 100%
ownership of LithiumB, S.A,
a Mozambique based
company, hold the Licences.
The security of the tenure
held at the time of reporting
along with any known
impediments to obtaining a
licence to operate in the
area.
6 Licenses were lodged and
registered with the
Mozambique Ministry of
Mineral Resources and
Energy for the projects in
this Announcement. 5 have
been granted (over an area
of 31,481 ha (314.8 km2)).
and a further 1 is under
application over a total area
of 31,620 ha (31.62km2)
(see Appendix 2 for License
details).
Acknowledgment and
appraisal of exploration by
other parties.
Artisanal and historic
workings and deeper pits,
identified from satellite
imagery, have been
developed over gembearing pegmatites.
Historical accounts indicate
limited shallow beryl,
tantalite and rare-earth
mineral mining has occurred
Criteria
JORC Code explanation
Commentary
in some areas. No recent
exploration has been
conducted on the
properties.
Geology
Deposit type, geological
setting and style of
mineralisation.
Potential Li-Ta-Cs (LCT)
type pegmatites which may
contain lithium
mineralisation in the form of
spodumene, petalite and/or
lepidolite as well as NYF
type of pegmatites. These
pegmatites are associated
with Pan-African granitoids
that intruded the
Mozambique Belt during the
Pan-African Orogeny.
Drill hole Information
A summary of all
information material to the
understanding of the
exploration results including
a tabulation of the following
information for all Material
drill holes:
No drill hole information at
this stage.
easting and northing of
the drill hole collar
elevation or RL (Reduced
Level – elevation above
sea level in metres) of
the drill hole collar
dip and azimuth of the
hole
down hole length and
interception depth
hole length.
If the exclusion of this
information is justified on
the basis that the
information is not Material
and this exclusion does not
detract from the
understanding of the report,
the Competent Person
should clearly explain why
this is the case.
Data aggregation
methods
In reporting Exploration
Results, weighting
averaging techniques,
maximum and/or minimum
grade truncations (eg
cutting of high grades) and
NA, not relevant at this
stage.
Criteria
JORC Code explanation
Commentary
cut-off grades are usually
Material and should be
stated.
Relationship between
mineralisation widths
and intercept lengths
Where aggregate intercepts
incorporate short lengths of
high grade results and
longer lengths of low grade
results, the procedure used
for such aggregation should
be stated and some typical
examples of such
aggregations should be
shown in detail.
Not relevant at this stage.
The assumptions used for
any reporting of metal
equivalent values should be
clearly stated.
NA, no assumptions made
at this stage.
These relationships are
particularly important in the
reporting of Exploration
Results.
NA, no drilling conducted at
this stage.
If the geometry of the
mineralisation with respect
to the drill hole angle is
known, its nature should be
reported.
If it is not known and only
the down hole lengths are
reported, there should be a
clear statement to this
effect (eg ‘down hole
length, true width not
known’).
Diagrams
Balanced reporting
Appropriate maps and
sections (with scales) and
tabulations of intercepts
should be included for any
significant discovery being
reported. These should
include, but not be limited
to a plan view of drill hole
collar locations and
appropriate sectional views.
NA, no significant
discoveries are being
reported.
Where comprehensive
reporting of all Exploration
Results is not practicable,
NA, no exploration results
being reported at this
stage.
Maps of the satellite image
interpretation have been
included.
Criteria
JORC Code explanation
Commentary
representative reporting of
both low and high grades
and/or widths should be
practiced to avoid
misleading reporting of
Exploration Results.
Other substantive
exploration data
Other exploration data, if
meaningful and material,
should be reported including
(but not limited to):
geological observations;
geophysical survey results;
geochemical survey results;
bulk samples – size and
method of treatment;
metallurgical test results;
bulk density, groundwater,
geotechnical and rock
characteristics; potential
deleterious or
contaminating substances.
Detailed interpretation of
satellite imagery was used
to determine old workings,
exposed and sub-cropping
pegmatites.
Further work
The nature and scale of
planned further work (eg
tests for lateral extensions
or depth extensions or
large-scale step-out
drilling).
Li3 plan to carry out
mapping and preliminary
rock chip sampling to
establish the presence of
lithium bearing pegmatites
and the nature of the
artisanal workings. Followup systematic soil and rock
chip sampling will be used
to establish drill targets.
RC and diamond drilling to
confirm surface results and
determined thickness and
depth extent of
mineralisation.
Diagrams clearly
highlighting the areas of
possible extensions,
including the main
geological interpretations
and future drilling areas,
provided this information is
not commercially sensitive.
Appendix 2: Mozambique Granted Licenses
Licence No.
Area
(ha)
Status
1.
9167 L
7,137 ha
Granted
2.
9190 L
3,840 ha
Granted
3.
9166 L
91 ha
Granted
4.
9168 L
2,743 ha
Granted
5.
9188 L
17,670 ha
Granted
Share your feedback
Discover