Odzi West - New Hard Rock Lithium Project
Released
Released
Announcement PDF
ASX Announcement
ASX: Li3
11 December 2018
Odzi West: New Hard Rock Lithium
Project
Zimbabwe Hard Rock Lithium
•
21 new Licenses granted in eastern Zimbabwe
•
Odzi West lithium project secured through the grant of 11 new
Licenses in eastern Zimbabwe
•
10 other Licenses granted at the Bepe and Day Dawn projects, which
are now covered by granted Licenses
•
The Company now holds 59 licences which comprise 8 hard rock
lithium projects in the Mutare Greenstone Belt in eastern Zimbabwe
with
•
Odzi West lithium project secured, further to our increasing
knowledge on the hard rock lithium potential in the Mutare
Greenstone
•
The Mutare Greenstone Belt has at-or-near surface pegmatites with
undeveloped lithium potential and which are exposed at surface
through outcrops or historical workings (for tantalite or other
pegmatitic minerals)
Lithium Consolidated Ltd (“Lithium Consolidated”, “Li3” or the “Company”) is
pleased to announce that we have been granted 21 new Prospecting Licenses (the
“Licenses”) in eastern Zimbabwe and through this we have secured the Odzi West hard
rock lithium project in eastern Zimbabwe, which comprises 11 of the newly granted
Licenses in eastern Zimbabwe.
We have also been granted 10 other Licenses at the Bepe and Day Dawn projects to
consolidate our position over the previously announced, Bepe and Day Dawn lithium
exploration projects (see Figure 2).
1
The company has a total of 59 Licenses covering an area of 2,543 ha in the Mutare
Greenstone Belt in eastern Zimbabwe (see Figures 1 and 2), with 50 granted Licenses
covering an area of 1,590 ha and 9 License applications, which are pending grant and
which cover an area of 953 ha.
The Odzi West lithium project was secured further to our increasing knowledge of the
hard rock lithium potential in the Mutare Greenstone Belt pegmatites, based on our
initial exploration activities.
Odzi West Lithium Project
The Odzi West Project comprises 11 of the newly granted Licenses and is located at the
south-western end of the Mutare Greenstone Belt (see Figure 1). There are at least
seven clusters of artisanal workings on distinct, separate pegmatites here with historical
reports documenting the presence of spodumene in one area of moderately extensive
workings, and petalite in another area of workings. Image analysis indicates that the
pegmatites could be moderately extensive as several appear to be flat-lying, with near
surface sheet-like configurations. The artisanal and historical workings have produced
beryl and tantalite in the past and appear to be inactive at present. Overall, there are
encouraging indications of prospects worthy of further evaluation for their lithium and
tantalum potential, with several of the clusters of artisanal workings within the newly
granted licences.
Figure 1
11 licences comprising the Odzi West Lithium Exploration Project
2
New Licenses Granted
The Company has a total of 59 Licenses covering an area 2,543 ha, with 50 granted
Licenses covering an area of 1,590 ha and 9 License applications which are pending
grant and cover an area of 953 ha.
In addition to the 11 Odzi West Licenses, we were granted a further 10 Licenses at the
Bepe and Day Dawn lithium projects.
The Company has 9 License Applications, which are still pending grant and cover an
area of 953 ha at the Magoda and Chisuma projects.
Figure 2
Mutare Greenstone Belt Lithium Exploration Projects
Project Name
No. of
Prospecting
Licenses
Area
Historical artisanal
mining
1.
Tals 5
1
140 ha
Beryl
2.
Nels Luck
8
308 ha
Tantalite
3.
Bepe
15
601 ha
Tantalite and beryl
4.
Magoda and
Magoda North
8
928 ha
N/A
5.
Day Dawn
4
75 ha
N/A
6.
Chisuma
6
149 ha
N/A
7.
Grey Lady
6
108 ha
Petalite
8.
Odzi West
11
234
Total
59(a)
2,543 ha
Note:
(a)
Additional Licenses under application for new areas of interest.
The Zimbabwe Projects could be developed independently or as satellite mining
operations given the proximity of the projects to each other, depending on the results
of exploration and mineral resource delineation.
The Zimbabwe Projects cover pegmatite outcrops and artisanal mine workings for beryl
and tantalite and the possible concealed extensions of the exposed pegmatites.
3
Figure 3
The 8 projects within the Mutare Greenstone Belt
Zimbabwe Hard Rock Lithium Projects
The Company has secured eight (8) lithium exploration projects in the Mutare
Greenstone Belt, located close to the border-town of Mutare in eastern Zimbabwe
(Figure 4).
The Mutare Greenstone Belt has:
-
locally extensive LCT pegmatites which were historically mined for beryl,
tantalite, cassiterite, and lithium minerals;
-
potentially flat-lying pegmatites that could be suited to open pit mining,
depending on the results of future evaluation; and
-
spodumene, petalite, and lepidolite mineralised pegmatites, identified in outcrops
and in the historical workings.
The Zimbabwe Lithium Projects are 300km from the port of Beira in Mozambique and
approximately 60km from the Mutare Railhead on the border between Zimbabwe and
Mozambique, which is connected to the port of Beira in Mozambique by the operating
Mutare-Beira railway line.
4
Figure 4
Zimbabwe Hard Rock Lithium Projects and Infrastructure
For more information, please contact:
Duncan Cornish
Company Secretary
Phone: +61 7 3212 6299
Please visit us at: http://www.li3limited.com
Cautionary Statements
Forward-looking statements
This document may contain certain forward-looking statements. Such statements are only
predictions, based on certain assumptions and involve known and unknown risks, uncertainties
and other factors, many of which are beyond the company’s control. Actual events or results
may differ materially from the events or results expected or implied in any forward-looking
statement.
The inclusion of such statements should not be regarded as a representation, warranty or
prediction with respect to the accuracy of the underlying assumptions or that any forwardlooking statements will be or are likely to be fulfilled. LCME undertakes no obligation to update
5
any forward-looking statement to reflect events or circumstances after the date of this document
(subject to securities exchange disclosure requirements).
The information in this document does not take into account the objectives, financial situation
or particular needs of any person or organisation. Nothing contained in this document constitutes
investment, legal, tax or other advice.
Competent Person’s Statement:
The information in this announcement that relates to the geological descriptions of the Zimbabwe
Projects is based on information reviewed and compiled by Michael Cronwright, a Competent
Person who is a fellow of The Geological Society of South Africa and Pr. Sci. Nat. (Geological
Sciences) registered with the South African Council for Natural Professions. Mr Cronwright is a
Principal Consultant with The MSA Group (Pty) Ltd, a South African based consultancy. Mr
Cronwright has sufficient experience relevant to the style of mineralisation and type of deposit
under consideration and to the activity he is undertaking to qualify as a Competent Person as
defined in the 2012 Edition of “Australasian Code for Reporting of Exploration Results, Mineral
Resources and Ore Reserves”. Mr Cronwright consents to the inclusion in the report of the
matters based on his information in the form and context in which it appears.
LITHIUM CONSOLIDATED LTD
ACN 612 008 358
Phone: +61 7 3212 6299
Fax: +61 7 3212 6250
Address: Level 6, 10 Market Street, Brisbane Q 4000
6
Appendix 1:
JORC Code, 2012 Edition – Table 1 report
Section 1 Sampling Techniques and Data
(Criteria in this section apply to all succeeding sections.)
Criteria
JORC Code explanation
Commentary
Sampling techniques
Nature and quality of sampling
(eg cut channels, random chips,
or specific specialised industry
standard measurement tools
appropriate to the minerals
under investigation, such as
down hole gamma sondes, or
handheld XRF instruments, etc).
These examples should not be
taken as limiting the broad
meaning of sampling.
Rock chip and grab samples
have been taken of potential
lithium mineralisation to
confirm the presence of
lithium mineralisation fromm
the Bepe, Tals 5 and Nels
Luck projects. Samples are to
be submitted to a suitable
laboratory for lithium assay
and XRD analysis.
Include reference to measures
taken to ensure sample
representivity and the
appropriate calibration of any
measurement tools or systems
used
The rock chip and grab
samples taken are considered
representative of the potential
lithium mineralisation present;
however, results should not
be considered to be
representative grade of the
mineralisation.
Aspects of the determination of
mineralisation that are Material
to the Public Report.
NA, Further details to be
provided once the samples
have been assayed.
In cases where ‘industry
standard’ work has been done
this would be relatively simple
(eg ‘reverse circulation drilling
was used to obtain 1 m samples
from which 3 kg was pulverised
to produce a 30 g charge for fire
assay’). In other cases more
explanation may be required,
such as where there is coarse
gold that has inherent sampling
problems. Unusual commodities
or mineralisation types (eg
submarine nodules) may warrant
disclosure of detailed information
Drilling techniques
7
Drill type (eg core, reverse
circulation, open-hole hammer,
rotary air blast, auger, Bangka,
sonic, etc) and details (eg core
diameter, triple or standard tube,
depth of diamond tails, facesampling bit or other type,
whether core is oriented and if
so, by what method, etc).
NA
Criteria
JORC Code explanation
Commentary
Drill sample recovery
Method of recording and
assessing core and chip sample
recoveries and results assessed.
NA
Measures taken to maximise
sample recovery and ensure
representative nature of the
samples.
NA.
Whether a relationship exists
between sample recovery and
grade and whether sample bias
may have occurred due to
preferential loss/gain of
fine/coarse material.
NA
Whether core and chip samples
have been geologically and
geotechnically logged to a level
of detail to support appropriate
Mineral Resource estimation,
mining studies and metallurgical
studies.
NA
Whether logging is qualitative or
quantitative in nature. Core (or
costean, channel, etc)
photography.
NA
The total length and percentage
of the relevant intersections
logged.
NA.
If core, whether cut or sawn and
whether quarter, half or all core
taken.
NA
Logging
Sub-sampling techniques
and sample preparation
If non-core, whether riffled, tube
sampled, rotary split, etc and
whether sampled wet or dry.
For all sample types, the nature,
quality and appropriateness of
the sample preparation
technique.
8
Quality control procedures
adopted for all sub-sampling
stages to maximise
representivity of samples.
NA
Measures taken to ensure that
the sampling is representative of
the in situ material collected,
including for instance results for
field duplicate/second-half
sampling.
NA.
Whether sample sizes are
appropriate to the grain size of
the material being sampled
NA
Criteria
JORC Code explanation
Commentary
Quality of assay data and
laboratory tests
The nature, quality and
appropriateness of the assaying
and laboratory procedures used
and whether the technique is
considered partial or total.
NA
For geophysical tools,
spectrometers, handheld XRF
instruments, etc, the parameters
used in determining the analysis
including instrument make and
model, reading times,
calibrations factors applied and
their derivation, etc.
NA
Nature of quality control
procedures adopted (eg
standards, blanks, duplicates,
external laboratory checks) and
whether acceptable levels of
accuracy (ie lack of bias) and
precision have been established.
NA
The verification of significant
intersections by either
independent or alternative
company personnel.
NA
Verification of sampling
and assaying
The use of twinned holes.
Location of data points
Data spacing and
distribution
9
Documentation of primary data,
data entry procedures, data
verification, data storage
(physical and electronic)
protocols.
NA
Discuss any adjustment to assay
data.
NA
Accuracy and quality of surveys
used to locate drill holes (collar
and down-hole surveys),
trenches, mine workings and
other locations used in Mineral
Resource estimation.
GPS coordinates have been
taken of the rock chip and
grab sample locations. Any
assay results from the rock
chip and grab samples shall
be used to confirm / refute
the presence of lithium
mineralisation only.
Specification of the grid system
used.
All coordinates are recorded in
the southern Africa ARC 1950
datum, UTM 36 South Zone,
unless otherwise specified.
Quality and adequacy of
topographic control
NA.
Data spacing for reporting of
Exploration Results.
NA.
Criteria
JORC Code explanation
Commentary
Whether the data spacing and
distribution is sufficient to
establish the degree of geological
and grade continuity appropriate
for the Mineral Resource and Ore
Reserve estimation procedure(s)
and classifications applied.
NA.
Whether sample compositing has
been applied.
NA.
Whether the orientation of
sampling achieves unbiased
sampling of possible structures
and the extent to which this is
known, considering the deposit
type.
Samples of potential lithium
mineralisation have been
taken and will be biased to the
zones identified as containing
potential lithium
mineralisation.
If the relationship between the
drilling orientation and the
orientation of key mineralised
structures is considered to have
introduced a sampling bias, this
should be assessed and reported
if material.
NA
Sample security
The measures taken to ensure
sample security.
Samples were taken by MSA
with a unique sample ticket
inserted into the plastic bag
and sealed with a cable tie.
MSA delivered the samples to
the LCME in-country
representative who shipped
the samples to a suitable
laboratory for assay.
Audits or reviews
The results of any audits or
reviews of sampling techniques
and data.
No audits or reviews of the
sampling techniques and data
have been done at this stage.
Orientation of data in
relation to geological
structure
Section 2 Reporting of Exploration Results
(Criteria listed in the preceding section also apply to this section.)
Criteria
JORC Code explanation
Commentary
Mineral tenement and land
tenure status
Type, reference name/number,
location and ownership including
agreements or material issues
with third parties such as joint
ventures, partnerships,
overriding royalties, native title
interests, historical sites,
wilderness or national park and
environmental settings.
See Appendix 2
10
1)
Criteria
JORC Code explanation
Commentary
The security of the tenure held at
the time of reporting along with
any known impediments to
obtaining a licence to operate in
the area.
The granted Prospecting
Licenses have been secured
in compliance with the Laws
of Zimbabwe.
Exploration done by other
parties
Acknowledgment and appraisal
of exploration by other parties.
No systematic exploration of
the licences has taken place
in the past. The licences do
contain historical and
artisanal workings that have
produced beryl and tantalite
in the past.
Geology
Deposit type, geological setting
and style of mineralisation.
The pegmatites within the
project areas include Li-Ta-Cs
(LCT) type pegmatites which
may contain lithium
mineralisation in the form of
spodumene, petalite and/or
lepidolite which will need to
be confirmed through a
systematic exploration
programme.
There are no known
impediments to securing the
Prospecting Licenses which
are pending grant.
These pegmatites are
Archaean in age and hosted
in slightly older Archean
greenstones and metasediments in the region.
Drill hole Information
A summary of all information
material to the understanding of
the exploration results including
a tabulation of the following
information for all Material drill
holes:
easting and northing of the
drill hole collar
elevation or RL (Reduced
Level – elevation above sea
level in metres) of the drill
hole collar
dip and azimuth of the hole
down hole length and
interception depth
hole length.
If the exclusion of this
information is justified on the
basis that the information is not
Material and this exclusion does
not detract from the
understanding of the report, the
Competent Person should clearly
explain why this is the case.
11
NA
Criteria
JORC Code explanation
Commentary
Data aggregation methods
In reporting Exploration Results,
weighting averaging techniques,
maximum and/or minimum
grade truncations (eg cutting of
high grades) and cut-off grades
are usually Material and should
be stated.
NA
Where aggregate intercepts
incorporate short lengths of high
grade results and longer lengths
of low grade results, the
procedure used for such
aggregation should be stated and
some typical examples of such
aggregations should be shown in
detail.
NA.
The assumptions used for any
reporting of metal equivalent
values should be clearly stated.
NA.
These relationships are
particularly important in the
reporting of Exploration Results.
NA
Relationship between
mineralisation widths and
intercept lengths
If the geometry of the
mineralisation with respect to the
drill hole angle is known, its
nature should be reported.
If it is not known and only the
down hole lengths are reported,
there should be a clear
statement to this effect (eg
‘down hole length, true width not
known’).
Diagrams
Appropriate maps and sections
(with scales) and tabulations of
intercepts should be included for
any significant discovery being
reported. These should include,
but not be limited to a plan view
of drill hole collar locations and
appropriate sectional views.
See document for locality
maps of the licences.
Balanced reporting
Where comprehensive reporting
of all Exploration Results is not
practicable, representative
reporting of both low and high
grades and/or widths should be
practiced to avoid misleading
reporting of Exploration Results.
NA
12
Criteria
JORC Code explanation
Commentary
Other substantive
exploration data
Other exploration data, if
meaningful and material, should
be reported including (but not
limited to): geological
observations; geophysical survey
results; geochemical survey
results; bulk samples – size and
method of treatment;
metallurgical test results; bulk
density, groundwater,
geotechnical and rock
characteristics; potential
deleterious or contaminating
substances.
A high-level desktop study
has been done as well as
detailed interpretation of
satellite imagery was used to
determine old workings,
exposed and sub-cropping
pegmatites.
The nature and scale of planned
further work (eg tests for lateral
extensions or depth extensions
or large-scale step-out drilling).
LCME plans to undertake a
systematic exploration
programme on the projects
and is currently in the
planning phase of this work.
This includes a data review,
mapping and preliminary rock
chip and grab sampling to
establish the presence of
lithium bearing pegmatites.
Further work
Diagrams clearly highlighting the
areas of possible extensions,
including the main geological
interpretations and future drilling
areas, provided this information
is not commercially sensitive.
The CP has visited the
licences comprising the Tals 5
and Nels Luck projects. But
has not visited any of the
other licences comprising the
other projects
Appendix 2: Zimbabwe Prospecting Licenses
Project
Prospecting
Licence
(Claim No)
(ha)
Status
1
Tals 5
018123A
140
Granted
2
Nels Luck
018121A
110
Granted
019060AA
23
Granted
019061AA
22
Granted
019062AA
17
Granted
019270 AA
24
Granted
019271 AA
12
Granted
019272 AA
25
Granted
018151A
75
Granted
018152A
141
Granted
019037AA
25
Granted
019038AA
25
Granted
019039AA
25
Granted
019040AA
25
Granted
031978 AA
25
Granted
031979 AA
24
Granted
3
13
Area
Bepe
Project
Prospecting
Licence
(Claim No)
4
5
6
7
8
14
Magoda
Day Dawn
Chisuma
Grey Lady
Area
(ha)
Status
031980 AA
25
Granted
031981 AA
20
Granted
031982 AA
25
Granted
031983 AA
25
Granted
031984 AA
25
Granted
019258 AA
24
Pending
018207 A
17
Pending
018122 A
150
Granted
018153A
142
Pending
018154A
131
Pending
018155A
149
Pending
018156A
80
Pending
018157A
90
Pending
018158A
116
Pending
018159A
105
Pending
018160A
115
Pending
019126AA
19
Granted
019421AA
22
Granted
019422AA
20
Granted
019423AA
14
Granted
019118AA
25
Granted
019120AA
25
Granted
019121AA
25
Granted
019122AA
24
Granted
019123AA
25
Granted
019362AA
25
Pending
019119 AA
24
Granted
019124 AA
23
Granted
019125 AA
22
Granted
019255 AA
14
Granted
019256 AA
17
Granted
019257 AA
8
Granted
019292 AA
25
Granted
019293 AA
19
Granted
019294 AA
25
Granted
019295 AA
18
Granted
019296 AA
18
Granted
Odzi West
Project
Prospecting
Licence
(Claim No)
15
Area
(ha)
Status
019297 AA
15
Granted
019298 AA
22
Granted
019299 AA
23
Granted
019300 AA
21
Granted
019301 AA
24
Granted
019302 AA
24
Granted
Share your feedback
Discover