Geochemical Sampling Extends Sanity Gold Anomalies - amended
Released
Released
Announcement PDF
ASX : TEM
2025-05-30 | Yalgoo - Further Geochemical Sampling Extends Sanity Gold Anomaly
TEM | Yalgoo - Further Geochemical Sampling Extends Sanity Gold Anomaly
(Amended)
Tempest Minerals Limited (ASX: TEM “Tempest” or “the Company”) provides the following as an
amendment to the ASX Announcement released on 21 May 2025.
The announcement has been amended to include:
● Body
● Updated image for clarity of point data
● Minor textual changes to reflect previously announced data
● Appendix
● ‘Not applicable’ changed to reflect JORC table if not why not requirements
● Additional locational data
This announcement has been authorised for release by the Board of the Company.
Contact
For more information, please contact:
Don Smith
Managing Director
Level 2, Suite 9
389 Oxford Street
Mt Hawthorn,
Western Australia
6016
Website
Instagram
LinkedIn
Twitter
Youtube
Facebook
+61 892000435
Tempest Minerals Ltd │ ACN 612 008 358
Phone: +61 8 9200 0435
Address: Level 2, Suite 9, 389 Oxford Street, Mt Hawthorn, WA 6016
Page 1 | 19
ASX : TEM
2025-05-30 | Yalgoo - Further Geochemical Sampling Extends Sanity Gold Anomaly
TEM | Yalgoo - Further Geochemical Sampling Extends Sanity Gold Anomaly
Key Points
● Surface sampling extends gold anomalism including soil samples up to 294ppb gold
● Enhanced gold footprint beside known gold deposit bode well for prospectivity
● Further work planned at Sanity target to progress towards drilling
Summary
Tempest Minerals Ltd (TEM) is pleased to provide updated information on the Sanity Target. Further
geochemical sampling at the Sanity Prospect, part of the Yalgoo Project, has led to the confirmation
and enhanced definition of the previously identified gold anomaly. The sampling density was
tightened from 200m x 200m to 100m x 100m, significantly improving the resolution of geochemical
data and highlighting a more coherent and continuous gold anomaly. The results increase
confidence within the Sanity Prospect and confirms the potential for a large-scale mineralised
system in the project area.
Yalgoo Project
Background
The Yalgoo Project contains a previously
unrecognised extension of the Yalgoo
Greenstone belt identified through the innovative
use of data analysis and is part of the flagship
100% Yalgoo regional holdings, which are
adjacent numerous world-class gold, base metal
and iron ore deposits 1.
TEM previously identified further easterly
extensions to the belt 2 and expanded this to
further to consolidate the Company’s dominant
position, comprising more than 1,000 km2 of high
potential exploration ground 3.
TEM has conducted the first-ever systematic
exploration in this portion of the Yalgoo Project
and the discovery of multiple mineralisation
occurrences 4, 5 by Tempest in exploration within
the same belt including the 2024 discovery of the
Remorse >4km Remorse Magnetite deposit 6, 7.
Nearby geological mapping and surface
geochemistry slightly to the south also
uncovered the Sanity gold target 8, which was
followed up in 2023 with the completion of
additional surface sampling at the Sanity Target
9
.
Page 2 | 19
ASX : TEM
2025-05-30 | Yalgoo - Further Geochemical Sampling Extends Sanity Gold Anomaly
Sanity Target
The Yalgoo project has a multitude of prospective targets, including the Sanity Target. Sanity presents as a
local distortion in geophysical datasets (including the 2023 airborne electromagnetic survey 10 ), which
correlates strongly with a multi-element geochemical anomaly in the collected samples (over 200 samples in
this area).
Contoured results for gold, shown in Figure 02, delineate strong, coherent anomalous zones. Gold having soil
peaks of up to 294ppb follow similar geometry correlating strongly with geophysical features immediately to
the south. Gold and silver follow an identical geochemical dispersion, further confirming the robustness of the
anomaly.
Individual rock chips from nearby mine workings (shafts) within the same geology trends have returned
results of up to 7g/t gold and 0.2% copper and >60% Iron, conforming to the regional exploration targets for
gold, base metals and iron (refer ASX release 30 October 2023 - Yalgoo Update - Gold Geochem Anomaly At
Sanity Target).
Elevated nickel above standard crustal levels, typically indicative of mafic and ultramafic rocks - such as
pyroxenite and metamorphosed mafics, present in the geological mapping in the vicinity, are potentially
indicative of a broader mineralised system, such as the high-grade gold system adjacent at the Barron
Rothchild deposit 11.
Figure 2: Sanity Target, magnetics and surface sampling results - Gold
Next Steps
-
Assessment of results with respect to regional and context for potential drilling in progress
-
Approvals for future works and geological modelling
-
Subject to outcome of further assessment works, targeting a drilling program.
Page 3 | 19
ASX : TEM
2025-05-30 | Yalgoo - Further Geochemical Sampling Extends Sanity Gold Anomaly
The Board of the Company has authorised the release of this announcement to the market.
About TEM
Tempest Minerals Ltd is an Australian based mineral exploration company with a diversified portfolio of projects in
Western Australia considered highly prospective for precious, base and energy metals. The Company has an
experienced board and management team with a history of exploration, operational and corporate success.
Tempest leverages the team’s energy, technical and commercial acumen to execute the Company’s mission - to
maximise shareholder value through focused, data-driven, risk-weighted exploration and development of our
assets.
Investor Information
investorhub.tempestminerals.com
TEM welcomes direct engagement and encourages shareholders and interested parties to visit the TEM
Investor hub which provides additional background information, videos and a forum for stakeholders to
communicate with each other and with the company.
Contact
For more information, please contact:
Don Smith
Managing Director
Level 2, Suite 9
389 Oxford Street
Mt Hawthorn,
Western Australia
6016
Website
Instagram
LinkedIn
Twitter
Youtube
Facebook
+61 892000435
Forward-looking statements
This document may contain certain forward-looking statements. Such statements are only predictions, based on certain
assumptions and involve known and unknown risks, uncertainties and other factors, many of which are beyond the company’s
control. Actual events or results may differ materially from the events or results expected or implied in any forward-looking
statement. The inclusion of such statements should not be regarded as a representation, warranty or prediction with respect to
the accuracy of the underlying assumptions or that any forward-looking statements will be or are likely to be fulfilled. Tempest
undertakes no obligation to update any forward-looking statement to reflect events or circumstances after the date of this
document (subject to securities exchange disclosure requirements). The information in this document does not take into
account the objectives, financial situation or particular needs of any person or organisation. Nothing contained in this document
constitutes investment, legal, tax or other advice.
Competent Person Statement
The information in this announcement that relates to Exploration Results and general project comments is based on information
compiled by Jirka Just who is the Geology Manager of Tempest Minerals Ltd. Jirka is a Member of the AIG and has sufficient
experience relevant to the style of mineralisation under consideration and to the activities undertaken to qualify as a Competent
Person as defined in the 2012 Edition of the ‘Australasian Code for Reporting of Exploration Results, Mineral Resources and Ore
Reserves’. Jirka consents to the inclusion in the report of the matters based on his information in the form and context in which
it appears.
Page 4 | 19
ASX : TEM
2025-05-30 | Yalgoo - Further Geochemical Sampling Extends Sanity Gold Anomaly
Appendix A: References
1. TEM ASX Announcement dated 06 August 2020
Murchison Province” ➤
“Enhanced Prospectivity at the Meleya Zone
2. TEM ASX Announcement dated 02 March 2022 “Meleya Update - Expansion of granted tenure” ➤
3. TEM Presentation 202412 Mines & Money ➤
4. TEM ASX Announcement dated 28 March 2022 “ Meleya Update - Significant Discovery” ➤
5. TEM ASX Announcement dated 09 December 2022 “ Meleya Update - Completion of drilling” ➤
6. TEM ASX Announcement dated 24 October 2024 “High-Grade Iron Intercepted In Early Drilling At
Remorse” ➤
7. TEM ASX Announcement dated 3 December 2024 “High-Grade Magnetite Deposit Emerging at
Remorse” ➤
8. TEM ASX Announcement dated 30 October 2023 “Gold Geochem Anomaly At Sanity Target ➤
9. TEM ASX Announcement dated 21 August 2023 “ Yalgoo Update - Remorse Geochem and Heritage
Surveys Completed” ➤
10.TEM ASX Announcement dated 16 October 2023 “Yalgoo Update - EM Survey Identifies Multiple High
Priority Targets” ➤
11.WA8 ASX Announcement dated 12 July 2023 “Rothschild Deposit Grows Significantly” ➤
Page 5 | 19
ASX : TEM
2025-05-30 | Yalgoo - Further Geochemical Sampling Extends Sanity Gold Anomaly
Appendix B: JORC Table 1
Section 1 Sampling Techniques and Data
(Criteria in this section apply to all succeeding sections.)
Criteria
Sampling
techniques
JORC Code explanation
●
●
●
●
Drilling
techniques
●
Commentary
Nature and quality of sampling (eg cut channels,
random chips, or specific specialised industry
standard measurement tools appropriate to the
minerals under investigation, such as down hole
gamma sondes, or handheld XRF instruments, etc).
These examples should not be taken as limiting the
broad meaning of sampling.
Include reference to measures taken to ensure sample
representivity and the appropriate calibration of any
measurement tools or systems used.
Aspects of the determination of mineralisation that
are Material to the Public Report.
In cases where ‘industry standard’ work has been
done this would be relatively simple (eg ‘reverse
circulation drilling was used to obtain 1 m samples
from which 3 kg was pulverised to produce a 30 g
charge for fire assay’). In other cases more
explanation may be required, such as where there is
coarse gold that has inherent sampling problems.
Unusual commodities or mineralisation types (eg
submarine nodules) may warrant disclosure of
detailed information.
●
Drill type (eg core, reverse circulation, open-hole
hammer, rotary air blast, auger, Bangka, sonic, etc) and
details (eg core diameter, triple or standard tube,
depth of diamond tails, face-sampling bit or other
type, whether core is oriented and if so, by what
method, etc).
●
●
●
●
●
300g sample collected from the top of the B horizon and placed into a pulp bag for assay. Samples were
unsieved as per lab analysis requirements.
The unsieved sample is considered representative of the sampled material.
Soil sample bags were collected onsite and delivered to LabWest Minerals Analysis in Perth by Tempest
personnel, and were tested via UltraFine+ gold and multi-element (50 elements) assay method.
Soil samples are only used to determine the presence of gold plus 50 elements and are not used to
determine mineral resources or reserves.
Rock chip samples were collected from outcrops using a geological hammer and placed into pulp
bags/calico bags for gold and multi-element (50 elements).
No drilling was conducted.
Page 6 | 19
ASX : TEM
2025-05-30 | Yalgoo - Further Geochemical Sampling Extends Sanity Gold Anomaly
Criteria
Drill
sample
recovery
JORC Code explanation
●
●
●
Logging
●
●
●
Sub-sampli
ng
techniques
and
sample
preparation
●
●
●
●
●
●
Commentary
Method of recording and assessing core and chip
sample recoveries and results assessed.
Measures taken to maximise sample recovery and
ensure representative nature of the samples.
Whether a relationship exists between sample
recovery and grade and whether sample bias may
have occurred due to preferential loss/gain of
fine/coarse material.
●
No drilling was conducted.
Whether core and chip samples have been
geologically and geotechnically logged to a level of
detail to support appropriate Mineral Resource
estimation, mining studies and metallurgical studies.
Whether logging is qualitative or quantitative in nature.
Core (or costean, channel, etc) photography.
The total length and percentage of the relevant
intersections logged.
●
Soils were qualitatively logged, including colour and texture and other geological context where
practicable.
If core, whether cut or sawn and whether quarter, half
or all core taken.
If non-core, whether riffled, tube sampled, rotary split,
etc and whether sampled wet or dry.
For all sample types, the nature, quality and
appropriateness of the sample preparation technique.
Quality control procedures adopted for all
sub-sampling stages to maximise representivity of
samples.
Measures taken to ensure that the sampling is
representative of the in situ material collected,
including
for
instance
results
for
field
duplicate/second-half sampling.
Whether sample sizes are appropriate to the grain size
of the material being sampled.
●
No core or subsampling was conducted.
Page 7 | 19
ASX : TEM
2025-05-30 | Yalgoo - Further Geochemical Sampling Extends Sanity Gold Anomaly
Criteria
Quality
of
assay data
and
laboratory
tests
JORC Code explanation
●
●
●
Verification
of sampling
and assaying
●
●
●
●
Location of
data points
●
●
●
Data spacing
and
distribution
●
●
●
Commentary
The nature, quality and appropriateness of the
assaying and laboratory procedures used and
whether the technique is considered partial or total.
For geophysical tools, spectrometers, handheld XRF
instruments, etc, the parameters used in determining
the analysis including instrument make and model,
reading times, calibrations factors applied and their
derivation, etc.
Nature of quality control procedures adopted (eg
standards, blanks, duplicates, external laboratory
checks) and whether acceptable levels of accuracy
(ie lack of bias) and precision have been established.
●
●
UltraFine+ analysis was used to determine gold and multi-element content. This method was chosen as
it detects low levels of Au and multi-elements within ultrafine (< 2 μm) fraction of soil samples.
UltraFine+ Leachwell is considered a partial method as only gold recoverable from cyanide will be
reported.
Laboratory QAQC results were used to determine the quality of data.
All samples were submitted to LabWest Minerals Analysis in Perth and were multi-element (50
elements) tested via UltraFine+ analysis UFF-PE.
No QAQC issues were encountered.
The verification of significant intersections by either
independent or alternative company personnel.
The use of twinned holes.
Documentation of primary data, data entry
procedures, data verification, data storage (physical
and electronic) protocols.
Discuss any adjustment to assay data.
●
No verification outside of QAQC mentioned above were conducted.
Accuracy and quality of surveys used to locate drill
holes (collar and down-hole surveys), trenches, mine
workings and other locations used in Mineral
Resource estimation.
Specification of the grid system used.
Quality and adequacy of topographic control.
●
Sample point locations collected by handheld GPS (±3m horizontal, up to 12m vertical error - however
error was consistently below 4m.
Datum WGS84 Grid UTM Zone 50S
Data spacing for reporting of Exploration Results.
Whether the data spacing and distribution is
sufficient to establish the degree of geological and
grade continuity appropriate for the Mineral Resource
and Ore Reserve estimation procedure(s) and
classifications applied.
Whether sample compositing has been applied.
●
●
●
●
●
Samples were located on a grid oriented at 090 on a nominal 100m line spacing and 100m sample
spacing.
Page 8 | 19
ASX : TEM
2025-05-30 | Yalgoo - Further Geochemical Sampling Extends Sanity Gold Anomaly
Criteria
JORC Code explanation
Orientation of
data
in
relation
to
geological
structure
●
●
Whether the orientation of sampling achieves
unbiased sampling of possible structures and the
extent to which this is known, considering the deposit
type.
If the relationship between the drilling orientation and
the orientation of key mineralised structures is
considered to have introduced a sampling bias, this
should be assessed and reported if material.
Commentary
●
●
●
●
●
Sample
security
Audits
reviews
The measures taken to ensure sample security.
●
●
or
●
The results of any audits or reviews of sampling
techniques and data.
●
●
●
●
●
Soil sample points were located perpendicular to the general strike of geological formations when they
were encountered. Most samples were acquired in areas with reasonably abundant outcropping surface
geology although much of it was deeply weathered.
Instances where the planned sample spacing was not adhered to were due to either accessibility issues
or insufficient soil cover.
Rock chip samples separate to the soil sampling grid were sporadically acquired from features of
interest but were not used in the creation of the contoured geochemical maps so as to not introduce
bias.
Each rock chip sample bag was composed of a representative selection of rock chips acquired across
each sampled outcrop to minimise bias.
Sample bags were collected onsite, photographed, and moved in scheduled weekly or collections
directly to the laboratory in Perth by Tempest or contract personnel.
All data is securely stored in the Tempest ‘Geobank’ database.
Sampling was conducted by experienced Tempest and contract personnel using consistent, repeatable,
industry-recognised methodology.
All sample data was collected electronically in the field using GRID mobile software.
Results were confirmed using lab QA/QC.
Assay results were thoroughly reviewed by Tempest staff.
All data is stored in the Tempest ‘Geobank’ database.
Page 9 | 19
ASX : TEM
2025-05-30 | Yalgoo - Further Geochemical Sampling Extends Sanity Gold Anomaly
Section 2 Reporting of Exploration Results
(Criteria listed in the preceding section also apply to this section.)
Criteria
Mineral
tenement and
land tenure
status
JORC Code explanation
Type, reference name/number, location and
ownership including agreements or material issues
with third parties such as joint ventures,
partnerships, overriding royalties, native title
interests, historical sites, wilderness or national
park and environmental settings.
The security of the tenure held at the time of
reporting along with any known impediments to
obtaining a licence to operate in the area.
●
●
Acknowledgment and appraisal of exploration by
other parties.
●
Tempest acknowledges the work by previous explorers including Minjar, Goldfields Exploration Pty Ltd,
Thundelarra Exploration Ltd, and Royal Resources Ltd.
●
Deposit type, geological setting and style of
mineralisation.
●
The project area lies over the easternmost interpreted extension of the Yalgoo Greenstone belt within the
Warriedar Fold Belt.
The Warriedar Fold Belt is known to comprise a folded sequence of dolerite and gabbro intercalated with
basalt, Banded Iron Formation (BIF), sediments, and ultramafics. The area is known to host several
historical gold workings at the Pinyalling Mining Centre (adjacent to the tenement area) where 958
ounces of gold was produced between 1902 - 1939 and later the Baron Rothschild project (pyrite and
pyrrhotite-associated gold-hosted BIF) explored by Thundelarra Exploration during the late 1990s.
Extensive historic works have been conducted over the eastern extension of the Yalgoo Greenstone belt
immediately west of the sampling area, and by correlation, can infer a deeper understanding of the East
Meleya Project geology supported by recent mapping. The main geology consists of a basal sequence of
mafic and ultramafic rocks overlain by a thick sequence of felsic volcanic rocks, and later by jaspilitic BIF
and banded grey chert intercalated with felsic volcanics. This is predominantly consistent with mapping
conducted at the sampling area.
The Sanity target is a coincidental geophysical (magnetic high and magnetic low) and geochemical (Au)
anomaly.
●
●
Exploration
done by other
parties
Geology
Commentary
●
●
●
●
●
All soil information quoted is from E5902493 and E5902786. These licences are 100% owned by Warrigal
Mining Pty Ltd which is a subsidiary of Tempest Minerals Ltd.
No overriding interests are present to the Company’s knowledge.
There are no impediments to working in the area.
Tempest acknowledges the traditional owners of the land.
Page 10 | 19
ASX : TEM
2025-05-30 | Yalgoo - Further Geochemical Sampling Extends Sanity Gold Anomaly
Criteria
Drill
hole
Information
Data
aggregation
methods
JORC Code explanation
●
A summary of all information material to the
understanding of the exploration results including a
tabulation of the following information for all Material
drill holes:
○ easting and northing of the drill hole collar
○ elevation or RL (Reduced Level – elevation
above sea level in metres) of the drill hole
collar
○ dip and azimuth of the hole
○ down hole length and interception depth
○ hole length.
○ If the exclusion of this information is justified
on the basis that the information is not
Material and this exclusion does not detract
from the understanding of the report, the
Competent Person should clearly explain why
this is the case.
●
No drillhole data is used in this announcement
●
In reporting Exploration Results, weighting averaging
techniques, maximum and/or minimum grade
truncations (e.g. cutting of high grades) and cut-off
grades are usually Material and should be stated.
Where aggregate intercepts incorporate short lengths
of high grade results and longer lengths of low grade
results, the procedure used for such aggregation
should be stated and some typical examples of such
aggregations should be shown in detail.
The assumptions used for any reporting of metal
equivalent values should be clearly stated.
●
●
No data aggregation methods were used.
No metal equivalent values are reported.
These relationships are particularly important in the
reporting of Exploration Results.
If the geometry of the mineralisation with respect to the
drill hole angle is known, its nature should be reported.
●
●
No mineralisation widths or intercepts are quoted in this announcement.
Grades are from soil sampling (point data) only
●
●
Relationship
between
mineralisatio
n widths and
Commentary
●
●
Page 11 | 19
ASX : TEM
2025-05-30 | Yalgoo - Further Geochemical Sampling Extends Sanity Gold Anomaly
Criteria
intercept
lengths
Diagrams
Balanced
reporting
Other
substantive
exploration
data
Further work
JORC Code explanation
Commentary
●
If it is not known and only the down hole lengths are
reported, there should be a clear statement to this
effect (eg ‘down hole length, true width not known’).
●
Appropriate maps and sections (with scales) and
tabulations of intercepts should be included for any
significant discovery being reported These should
include, but not be limited to a plan view of drill hole
collar locations and appropriate sectional views.
●
Appropriate diagrams and/or tabulations are included in the body of the announcement.
●
Where comprehensive reporting of all Exploration
Results is not practicable, representative reporting of
both low and high grades and/or widths should be
practiced to avoid misleading reporting of Exploration
Results.
●
The complete set of sample points and assay grade results are presented in map form (Figure 2) in th
body of the announcement. No sample locations or assay results are excluded.
●
Other exploration data, if meaningful and material,
should be reported including (but not limited to):
geological observations; geophysical survey results;
geochemical survey results; bulk samples – size and
method of treatment; metallurgical test results; bulk
density,
groundwater,
geotechnical and rock
characteristics; potential deleterious or contaminating
substances.
●
●
●
●
●
No drilling was undertaken
Further exploration results by TEM can be found in the Company’s list of ASX announcements
This announcement references some of these in Appendix A including the pertinent previous releases.
All relevant exploration data related to the current sampling has been included in this report.
All data related to geochemical sampling by Tempest Minerals is available in the C166/2022 Combined
Reporting Group annual reports A135604 (2023/24) and A148482 (2024/25).
●
The nature and scale of planned further work (eg tests
for lateral extensions or depth extensions or large-scale
step-out drilling).
Diagrams clearly highlighting the areas of possible
extensions,
including
the
main
geological
interpretations and future drilling areas, provided this
information is not commercially sensitive.
●
Tempest Minerals will progress regulatory approvals and develop an initial drill program for the resultant
target area.
A POW (Reg. ID: 123402) is approved for the target area.
Exploration programs planned going forward may include:
○ Detailed geological interpretations and modelling
○ Downhole Electromagnetics
○ Airborne and ground-based EPR geophysical surveys
○ RAB or Aircore drilling
○ RC Drilling
○ Diamond Drilling
○ Further survey mapping and geochemical sampling
●
●
●
●
Page 12 | 19
ASX : TEM
2025-05-30 | Yalgoo - Further Geochemical Sampling Extends Sanity Gold Anomaly
Appendix C: Results
North
East
Alti
Au_PPM
541923.42
6784287
323.384
0.013
541865.224
6784343
325.781
0.026
544440.47
6785012
324
0.001
542234.811
6784262
321.673
0.009
542321.13
6784178
317.039
0.006
542205.712
6784290
323.52
0.113
542176.613
6784318
324.367
0.123
542091.265
6784402
324.296
0.18
542120.365
6784374
324.237
0.088
543370.597
6785254
339.585
0.047
542063.139
6784430
324.864
0.139
543543.236
6785086
344.776
0.002
543398.722
6785226
341.717
0.011
543656.703
6784974
343.781
0.529
543427.821
6785198
343.466
0.105
543801.211
6784833
327.045
0.11
543514.138
6785114
345.905
0.005
542065.997
6784148
321.995
0.031
543571.361
6785058
344.683
0.102
542008.772
6784203
322
0.075
543685.8
6784946
341.031
0.139
541801.889
6783257
311
0.005
543714.898
6784918
337.184
0.072
543004.145
6784619
320.974
0.002
542036.898
6784175
321.315
0.016
543763.325
6786131
324.981
0.002
541979.672
6784231
322.595
0.059
543727.439
6786167
323.795
0.008
541950.573
6784259
323.132
0.024
543617.83
6786272
323.33
0.001
541766.007
6783292
311.891
0.008
543621.613
6785986
322.582
0.003
542888.725
6784731
321.047
0.012
543585.727
6786022
323.685
0.007
542859.63
6784759
320.493
0.031
543623.994
6785845
323.812
0.01
543835.099
6786061
326.045
0.002
543479.471
6785985
322.751
0.006
543689.607
6786202
325
0.003
543442.616
6786021
322.062
0.02
543727.869
6786024
323.403
0.004
543832.72
6786203
325.425
0.014
543691.984
6786059
323.615
0.003
543689.172
6786344
323.669
0.006
543656.094
6786094
324
0.007
543831.318
6786346
328.816
0.006
543584.322
6786165
321.857
0.004
543795.432
6786381
328.232
0.005
543548.432
6786199
321.213
0.007
542888.729
6784732
321.047
0.023
543694.365
6785917
323
0.006
542859.63
6784759
320.493
0.017
543674.586
6784301
317.159
0.002
543588.109
6785880
322.396
0.01
544040.352
6784749
323.021
0.02
543551.247
6785915
322
0.008
542181.777
6782810
307.242
0.001
543796.839
6786240
325.495
1.8
542181.415
6784035
317.574
0.001
543760.949
6786274
324.875
0.065
542292.036
6784207
319.16
0.01
541622.472
6783433
317.31
0.006
542149.46
6784346
324.288
0.089
543974.864
6786204
327
0.011
543456.919
6785171
346.069
0.058
543938.979
6786240
326.4
0.012
542123.218
6784091
319.686
0.005
543903.093
6786276
326.183
0.006
543743.995
6784890
331.565
0.054
543004.145
6784619
320.974
0.001
543937.578
6786383
328.435
0.001
543549.842
6786058
323.007
0.01
542961.469
6784661
320.62
0.003
543513.956
6786093
323.948
0.002
541730.124
6783328
312.715
0.007
543478.065
6786128
321.931
0.003
543100.418
6783558
308.816
0.001
544082.097
6786242
331.542
0.007
543369.551
6783947
312.502
0.001
543515.361
6785950
322.427
0.011
542617.591
6783279
307.385
0.001
541658.355
6783398
315.811
0.007
542219.649
6783051
307.024
0.001
543941.357
6786098
326.193
0.006
Page 13 | 19
ASX : TEM
2025-05-30 | Yalgoo - Further Geochemical Sampling Extends Sanity Gold Anomaly
543905.468
6786133
327.201
0.005
542418.654
6784228
309.8039074
0.012
543868.609
6786168
326.612
0.004
542696.162
6783992
291.8223877
0.0109
543725.059
6786308
324.505
0.017
543105.968
6783999
295.2041626
0.0009
544011.726
6786170
328.519
0.007
542798.183
6784205
296.0983887
0.0058
542960.5
6784662
320.62
0.006
542423.537
6784233
298.7711182
0.0166
542946.922
6784675
320.589
0.026
542695.719
6784397
295.2266846
0.0286
542924.612
6784696
320.954
0.01
543107.47
6784398
297.2598877
0.0027
544046.212
6786277
329.215
0.001
544342.616
6786393
324.0209961
0.0202
542408.231
6782725
308.722
0.001
544597.542
6786605
313.1086426
0.0093
541894.324
6784315
323.742
0.649
544437.414
6786486
351.659
7.92
542262.937
6784234
319.998
0.015
544406.955
6786666
327.0623169
0.0074
542152.316
6784063
318.781
0.012
544657.46
6786241
337.378
0.0279
542034.039
6784458
323.296
0.018
544330.96
6786652
325.1576538
0.004
542004.939
6784486
323
0.004
544504.863
6786054
Share your feedback
Discover